I find all of the pi-utils very useful and thank MikeB for creating them.
Recently with changes happening I noticed that pi-setup_mythtv_31.sh has a small typo. If you choose to install mythplugins it fails due to the typo. The command should be sudo apt install mythplugins-light
I suggest trying these utilities as they have saved me lots of time. https://github.com/MikeB2013/pi-utils
pi-utils/pi-setup_mythtv_31.sh
- jfabernathy
- Senior
- Posts: 577
- Joined: Wed Feb 18, 2015 2:37 pm
- Location: Raleigh, NC
pi-utils/pi-setup_mythtv_31.sh
Last edited by jfabernathy on Sat Jun 20, 2020 10:45 pm, edited 1 time in total.
Re: pi-utils/pi-setup_mythtv_31.sh
Jim,
Thanks, I have updated the script on github repository.
Mike.
Thanks, I have updated the script on github repository.
Mike.
- jfabernathy
- Senior
- Posts: 577
- Joined: Wed Feb 18, 2015 2:37 pm
- Location: Raleigh, NC
Re: pi-utils/pi-setup_mythtv_31.sh
In testing pi-setup_mythtv_v31.sh I've found it works great on the standard PI OS Desktop version. If you want to start with PI OS Lite, you would need to add the following to the script:
This may not affect many, but I found this out in testing for someone who wanted a barebones RPi3B+ installation of frontend only for v31.
Code: Select all
sudo apt install --no-install-recommends xserver-xorg
- jfabernathy
- Senior
- Posts: 577
- Joined: Wed Feb 18, 2015 2:37 pm
- Location: Raleigh, NC
Re: pi-utils/pi-setup_mythtv_31.sh
I found out something has changed. Today with the latest kernel 5.4.51 changes all I did was create a Raspberry PI OS Lite system, then clone the pi-utils from https://github.com/MikeB2013/pi-utils and run pi-utils/pi-setup_mythtv_31.sh, reboot, then run ./pi-mythbackend-helper.sh, followed by a reboot.jfabernathy wrote: ↑Thu Jun 25, 2020 4:22 pmIn testing pi-setup_mythtv_v31.sh I've found it works great on the standard PI OS Desktop version. If you want to start with PI OS Lite, you would need to add the following to the script:This may not affect many, but I found this out in testing for someone who wanted a barebones RPi3B+ installation of frontend only for v31.Code: Select all
sudo apt install --no-install-recommends xserver-xorg
At that point I run ./run_mythsetup.sh and it went into mythtv-setup like you'd expect. No need to install xserver-xorg. Now all I have to do is move the system to a USB3 SSD for speed.
Re: pi-utils/pi-setup_mythtv_31.sh
With the notification of the Bintray site being decommissioned [1], are there plans to update the pi-utils scripts to use the new https://dl.orangedox.com/pCBmBm download location?
[1] See notice at the top of the MythTV_Light wiki page.
[1] See notice at the top of the MythTV_Light wiki page.
Re: pi-utils/pi-setup_mythtv_31.sh
So in the source list for updates the old link doesn't work anymore (deb http://dl.bintray.com/bennettpeter/deb/ buster myth31) due to the take down of the old site.
Is there are replacement link for updates that is on the new site?
Is there are replacement link for updates that is on the new site?