Hauppauge HD-PVR2 / Colossus2 support
Moderator: Forum Moderators
Re: Hauppauge HD-PVR2 / Colossus2 support
atinker, did you get it working with Arch?
FX2Device_t::m_firmwareBytesLen is defined in HauppaugeUSB//FX2Firmware.cpp.
FX2Firmware.cpp is created during the build process, from Hauppauge/Common/FX2API/FX2Firmware.bin
Does FX2Firmware.cpp exist? Does it define that variable?
FX2Device_t::m_firmwareBytesLen is defined in HauppaugeUSB//FX2Firmware.cpp.
FX2Firmware.cpp is created during the build process, from Hauppauge/Common/FX2API/FX2Firmware.bin
Does FX2Firmware.cpp exist? Does it define that variable?
Re: Hauppauge HD-PVR2 / Colossus2 support
I had this working with mythtv last year. but it broke the end of last year and I did not have time to mess with it , but now I want it working again
I have it working dumping a file to test , it is only when used with mythtv it fails , here is some logs
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/dtvsignalmonitor.cpp:323 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Program #0 not found in PAT!#012Program Association Section#012 PSIP tableID(0x0)012 program number 1 has PID 0x0200
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/dtvsignalmonitor.cpp:329 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): But there is only one program in the PAT, so we'll just use it
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E TVRecEvent recorders/recorderbase.cpp:232 (SetStrOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetStrOption(...recordingtype): Option not in profile.
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E TVRecEvent recorders/recorderbase.cpp:222 (SetIntOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetIntOption(...recordmpts): Option not in profile.
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/ExternalStreamHandler.cpp:692 (run) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Failed to read from External Recorder: data poll eof (POLLHUP)
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/ExternalStreamHandler.cpp:774 (run) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Fatal Error from External Recorder: data poll eof (POLLHUP)
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/ExternalStreamHandler.cpp:1268 (ProcessVer2) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): External Recorder in bad state: data poll eof (POLLHUP)
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: W ExternSH recorders/ExternalStreamHandler.cpp:287 (KillIfRunning) 'pkill --signal 9 -x -f "-c /etc/mythtv/Colossus1.conf --verbose general --loglevel info --quiet --syslog local7" 2>&1 > /dev/null' failed: #012#011#
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: W ExternSH recorders/ExternalStreamHandler.cpp:292 (KillIfRunning) '-c /etc/mythtv/Colossus1.conf --verbose general --loglevel info --quiet --syslog local7' terminated.
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E RecThread recorders/ExternalRecorder.cpp:114 (run) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Stream handler died unexpectedly.
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E RecThread recorders/ExternalStreamHandler.cpp:1099 (StopStreaming) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): External Recorder not started.
I have it working dumping a file to test , it is only when used with mythtv it fails , here is some logs
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/dtvsignalmonitor.cpp:323 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Program #0 not found in PAT!#012Program Association Section#012 PSIP tableID(0x0)012 program number 1 has PID 0x0200
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/dtvsignalmonitor.cpp:329 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): But there is only one program in the PAT, so we'll just use it
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E TVRecEvent recorders/recorderbase.cpp:232 (SetStrOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetStrOption(...recordingtype): Option not in profile.
Feb 15 14:00:10 myth-be-01b mythbackend: mythbackend[1824]: E TVRecEvent recorders/recorderbase.cpp:222 (SetIntOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetIntOption(...recordmpts): Option not in profile.
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/ExternalStreamHandler.cpp:692 (run) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Failed to read from External Recorder: data poll eof (POLLHUP)
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/ExternalStreamHandler.cpp:774 (run) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Fatal Error from External Recorder: data poll eof (POLLHUP)
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E ExternSH recorders/ExternalStreamHandler.cpp:1268 (ProcessVer2) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): External Recorder in bad state: data poll eof (POLLHUP)
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: W ExternSH recorders/ExternalStreamHandler.cpp:287 (KillIfRunning) 'pkill --signal 9 -x -f "-c /etc/mythtv/Colossus1.conf --verbose general --loglevel info --quiet --syslog local7" 2>&1 > /dev/null' failed: #012#011#
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: W ExternSH recorders/ExternalStreamHandler.cpp:292 (KillIfRunning) '-c /etc/mythtv/Colossus1.conf --verbose general --loglevel info --quiet --syslog local7' terminated.
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E RecThread recorders/ExternalRecorder.cpp:114 (run) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Stream handler died unexpectedly.
Feb 15 14:13:38 myth-be-01b mythbackend: mythbackend[1824]: E RecThread recorders/ExternalStreamHandler.cpp:1099 (StopStreaming) ExternalRec[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): External Recorder not started.
Re: Hauppauge HD-PVR2 / Colossus2 support
ibedonc, you should also have a log file generated by the hauppuage2 application in the same directory. If you are using a reasonably recent version, then the log file will be named something like "hauppage2-E585-00AABBCC.log".
What happens if you try and run the hauppuage2 program directly? Start with just listing the detected devices:
Then try a basic capture:
Depending on what your STB is producing, you may not get audio unless you tell it what kind to expect.
What happens if you try and run the hauppuage2 program directly? Start with just listing the detected devices:
Code: Select all
/opt/Hauppauge/bin/hauppauge2 --list
Code: Select all
/opt/Hauppauge/bin/hauppauge2 --serial E585-00-00AABBCC --output test.ts
Re: Hauppauge HD-PVR2 / Colossus2 support
I have the lastest , and --list works
root@myth-be-01b:~# hauppauge2 -l
[Bus: 2 Port: 1] 2040:0xe585 E585-00-00D6437D Colossus 2
Number of possible configurations: 1 Device Class: 0 VendorID: 8256 ProductID: 58757
Manufacturer: Hauppauge
Serial: E585-00-00D6437D
Interfaces: 1 ||| Number of alternate settings: 1 | Interface Number: 0 | Number of endpoints: 6 | Descriptor Type: 5 | EP Address: 129 | Descriptor Type: 5 | EP Address: 132 | Descriptor Type: 5 | EP Address: 136 | Descriptor Type: 5 | EP Address: 1 | Descriptor Type: 5 | EP Address: 2 | Descriptor Type: 5 | EP Address: 134 |
also I can get get good video and sound from commandline
https://www.roosterclaw.net/owncloud/in ... 7LjyiAabMN << log on my owncloud server
dmesg shows this also
bad card ?
[ 5968.087263] usb 2-1: reset high-speed USB device number 3 using xhci_hcd
[ 5980.171252] usb 2-1: reset high-speed USB device number 3 using xhci_hcd
[ 6733.482354] usb 2-1: reset high-speed USB device number 3 using xhci_hcd
[ 6733.761316] usb 2-1: usbfs: process 4578 (HAPI-cmd) did not claim interface 0 before use
[ 6736.601644] usb 2-1: USB disconnect, device number 3
[ 6736.943945] usb 2-1: new high-speed USB device number 4 using xhci_hcd
[ 6738.898555] usb 2-1: New USB device found, idVendor=2040, idProduct=e585
[ 6738.898559] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6738.898561] usb 2-1: Product: WinTV
[ 6738.898563] usb 2-1: Manufacturer: Hauppauge
[ 6738.898565] usb 2-1: SerialNumber: E585-00-00D6437D
[ 6791.202828] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[ 7029.429022] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[ 7107.657707] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[ 8986.874510] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[10002.232621] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[10221.575994] perf: interrupt took too long (3184 > 3158), lowering kernel.perf_event_max_sample_rate to 62750
[10379.403629] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
root@myth-be-01b:~# hauppauge2 -l
[Bus: 2 Port: 1] 2040:0xe585 E585-00-00D6437D Colossus 2
Number of possible configurations: 1 Device Class: 0 VendorID: 8256 ProductID: 58757
Manufacturer: Hauppauge
Serial: E585-00-00D6437D
Interfaces: 1 ||| Number of alternate settings: 1 | Interface Number: 0 | Number of endpoints: 6 | Descriptor Type: 5 | EP Address: 129 | Descriptor Type: 5 | EP Address: 132 | Descriptor Type: 5 | EP Address: 136 | Descriptor Type: 5 | EP Address: 1 | Descriptor Type: 5 | EP Address: 2 | Descriptor Type: 5 | EP Address: 134 |
also I can get get good video and sound from commandline
https://www.roosterclaw.net/owncloud/in ... 7LjyiAabMN << log on my owncloud server
dmesg shows this also
bad card ?
[ 5968.087263] usb 2-1: reset high-speed USB device number 3 using xhci_hcd
[ 5980.171252] usb 2-1: reset high-speed USB device number 3 using xhci_hcd
[ 6733.482354] usb 2-1: reset high-speed USB device number 3 using xhci_hcd
[ 6733.761316] usb 2-1: usbfs: process 4578 (HAPI-cmd) did not claim interface 0 before use
[ 6736.601644] usb 2-1: USB disconnect, device number 3
[ 6736.943945] usb 2-1: new high-speed USB device number 4 using xhci_hcd
[ 6738.898555] usb 2-1: New USB device found, idVendor=2040, idProduct=e585
[ 6738.898559] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6738.898561] usb 2-1: Product: WinTV
[ 6738.898563] usb 2-1: Manufacturer: Hauppauge
[ 6738.898565] usb 2-1: SerialNumber: E585-00-00D6437D
[ 6791.202828] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[ 7029.429022] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[ 7107.657707] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[ 8986.874510] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[10002.232621] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
[10221.575994] perf: interrupt took too long (3184 > 3158), lowering kernel.perf_event_max_sample_rate to 62750
[10379.403629] usb 2-1: reset high-speed USB device number 4 using xhci_hcd
Re: Hauppauge HD-PVR2 / Colossus2 support
made this video from commandline
https://www.roosterclaw.net/owncloud/in ... jOLNuNhdUi
https://www.roosterclaw.net/owncloud/in ... jOLNuNhdUi
Re: Hauppauge HD-PVR2 / Colossus2 support
Actually, you don't. In your log file it shows:
Code: Select all
APIVersion?: 'ERR:Unrecognized command'
Also:
Code: Select all
Version?: 'OK:0.1'
John
Re: Hauppauge HD-PVR2 / Colossus2 support
hmm I have been doing a git fetch , I thought that updates the files
ok moved to old , did a new clone
waiting for compile to finish
ok moved to old , did a new clone
waiting for compile to finish
Re: Hauppauge HD-PVR2 / Colossus2 support
Code: Select all
git fetch
Code: Select all
git pull
Re: Hauppauge HD-PVR2 / Colossus2 support
now this is better , but still problems
like screen is blank and no sound , and when you exit it crashes mythtv BE and systemd restarts it
CMDLINE still works
2019-02-15 17:26:50.303301 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-15 17:26:50.320483 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-15 17:26:50.320697 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-15 17:26:50.320839 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-15 17:26:50.320968 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-15 17:26:50.321099 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-15 17:26:50.321228 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-15 17:26:50.321421 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-15 17:26:51.181934 N [Commands] MythTV.cpp:254 (send_status) - 7:Version?: '7:OK:0.5'
2019-02-15 17:26:51.182216 N [Commands] MythTV.cpp:254 (send_status) - 8:LockTimeout?: '8:OK:12000'
2019-02-15 17:26:51.611363 N [Commands] HauppaugeDev.cpp:502 (Open) - Opening Hauppauge USB device.
2019-02-15 17:26:51.619652 N [Commands] HauppaugeDev.cpp:524 (Open) - FX2 ready after 0 tries.
2019-02-15 17:26:55.786483 N [Commands] HauppaugeDev.cpp:544 (Open) - encDev ready
2019-02-15 17:26:55.786593 N [Commands] HauppaugeDev.cpp:553 (Open) - Using 1080p6050 w/AC3 EDID.
2019-02-15 17:26:55.789046 N [Commands] HauppaugeDev.cpp:576 (Open) - rxDev ready
2019-02-15 17:26:55.789109 N [Commands] HauppaugeDev.cpp:589 (Open) - Hauppauge USB device ready.
2019-02-15 17:26:55.789281 N [Commands] MythTV.cpp:254 (send_status) - 9:SignalStrengthPercent?: '9:OK:100'
2019-02-15 17:26:57.791600 N [Commands] MythTV.cpp:254 (send_status) - 10:SignalStrengthPercent?: '10:OK:100'
2019-02-15 17:26:57.791754 N [Commands] MythTV.cpp:254 (send_status) - 11:SignalStrengthPercent?: '11:OK:100'
2019-02-15 17:26:57.791857 N [Commands] MythTV.cpp:254 (send_status) - 12:HasLock?: '12:OK:Yes'
2019-02-15 17:26:57.792359 N [Commands] MythTV.cpp:254 (send_status) - 13:IsOpen?: '13:OK:Open'
2019-02-15 17:26:57.792575 N [Commands] MythTV.cpp:254 (send_status) - 14:Version?: '14:OK:0.5'
2019-02-15 17:26:58.417409 N [Commands] HauppaugeDev.cpp:129 (set_input_format) - Input width: 1920 height: 1080 interlaced: 1 vFreq: 60 audio SR: 0
2019-02-15 17:26:58.424144 N [Commands] HauppaugeDev.cpp:152 (set_input_format) - Audio Input set to S/PDIF
2019-02-15 17:26:58.424223 N [Commands] HauppaugeDev.cpp:221 (set_input_format) - Audio codec: AC3
2019-02-15 17:26:58.424275 N [Commands] FlipInterlacedFields.cpp:19 (FlipHDMIFields) - HDMI: flipping field order.
2019-02-15 17:26:58.945053 N [Commands] HauppaugeDev.cpp:370 (init_component) - Component video input initialized.
2019-02-15 17:26:59.844242 N [Commands] MythTV.cpp:254 (send_status) - 15:StartStreaming: '15:OK:Started'
2019-02-15 17:26:59.845251 N [Commands] MythTV.cpp:254 (send_status) - 16:XON: '16:OK'
2019-02-15 17:27:16.427420 N [Commands] MythTV.cpp:254 (send_status) - 17:CloseRecorder: '17:OK:Terminating'
2019-02-15 17:27:16.427527 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:16.427584 N [Commands] MythTV.cpp:216 (StopEncoding) - Stopping encoder.
2019-02-15 17:27:17.821487 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:17.973802 N [Commands] MythTV.cpp:224 (StopEncoding) - Encoder stopped
2019-02-15 17:27:18.276101 C [main] hauppauge2.cpp:458 (main) - Done.
2019-02-15 17:27:36.503483 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-15 17:27:36.520346 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-15 17:27:36.520536 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-15 17:27:36.520704 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-15 17:27:36.520844 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-15 17:27:36.520952 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-15 17:27:36.521083 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-15 17:27:36.521222 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-15 17:27:36.528822 N [Commands] MythTV.cpp:254 (send_status) - 7:CloseRecorder: '7:OK:Terminating'
2019-02-15 17:27:36.528925 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:36.529067 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:36.545643 C [main] hauppauge2.cpp:458 (main) - Done.
eb 15 17:27:16 myth-be-01b mythbackend: mythbackend[1824]: E TVRecEvent recorders/streamhandler.cpp:43 (~StreamHandler) SH(/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): dtor & _stream_data_list not empty
root@myth-be-01b:/var/log/mythtv#
like screen is blank and no sound , and when you exit it crashes mythtv BE and systemd restarts it
CMDLINE still works
2019-02-15 17:26:50.303301 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-15 17:26:50.320483 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-15 17:26:50.320697 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-15 17:26:50.320839 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-15 17:26:50.320968 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-15 17:26:50.321099 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-15 17:26:50.321228 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-15 17:26:50.321421 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-15 17:26:51.181934 N [Commands] MythTV.cpp:254 (send_status) - 7:Version?: '7:OK:0.5'
2019-02-15 17:26:51.182216 N [Commands] MythTV.cpp:254 (send_status) - 8:LockTimeout?: '8:OK:12000'
2019-02-15 17:26:51.611363 N [Commands] HauppaugeDev.cpp:502 (Open) - Opening Hauppauge USB device.
2019-02-15 17:26:51.619652 N [Commands] HauppaugeDev.cpp:524 (Open) - FX2 ready after 0 tries.
2019-02-15 17:26:55.786483 N [Commands] HauppaugeDev.cpp:544 (Open) - encDev ready
2019-02-15 17:26:55.786593 N [Commands] HauppaugeDev.cpp:553 (Open) - Using 1080p6050 w/AC3 EDID.
2019-02-15 17:26:55.789046 N [Commands] HauppaugeDev.cpp:576 (Open) - rxDev ready
2019-02-15 17:26:55.789109 N [Commands] HauppaugeDev.cpp:589 (Open) - Hauppauge USB device ready.
2019-02-15 17:26:55.789281 N [Commands] MythTV.cpp:254 (send_status) - 9:SignalStrengthPercent?: '9:OK:100'
2019-02-15 17:26:57.791600 N [Commands] MythTV.cpp:254 (send_status) - 10:SignalStrengthPercent?: '10:OK:100'
2019-02-15 17:26:57.791754 N [Commands] MythTV.cpp:254 (send_status) - 11:SignalStrengthPercent?: '11:OK:100'
2019-02-15 17:26:57.791857 N [Commands] MythTV.cpp:254 (send_status) - 12:HasLock?: '12:OK:Yes'
2019-02-15 17:26:57.792359 N [Commands] MythTV.cpp:254 (send_status) - 13:IsOpen?: '13:OK:Open'
2019-02-15 17:26:57.792575 N [Commands] MythTV.cpp:254 (send_status) - 14:Version?: '14:OK:0.5'
2019-02-15 17:26:58.417409 N [Commands] HauppaugeDev.cpp:129 (set_input_format) - Input width: 1920 height: 1080 interlaced: 1 vFreq: 60 audio SR: 0
2019-02-15 17:26:58.424144 N [Commands] HauppaugeDev.cpp:152 (set_input_format) - Audio Input set to S/PDIF
2019-02-15 17:26:58.424223 N [Commands] HauppaugeDev.cpp:221 (set_input_format) - Audio codec: AC3
2019-02-15 17:26:58.424275 N [Commands] FlipInterlacedFields.cpp:19 (FlipHDMIFields) - HDMI: flipping field order.
2019-02-15 17:26:58.945053 N [Commands] HauppaugeDev.cpp:370 (init_component) - Component video input initialized.
2019-02-15 17:26:59.844242 N [Commands] MythTV.cpp:254 (send_status) - 15:StartStreaming: '15:OK:Started'
2019-02-15 17:26:59.845251 N [Commands] MythTV.cpp:254 (send_status) - 16:XON: '16:OK'
2019-02-15 17:27:16.427420 N [Commands] MythTV.cpp:254 (send_status) - 17:CloseRecorder: '17:OK:Terminating'
2019-02-15 17:27:16.427527 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:16.427584 N [Commands] MythTV.cpp:216 (StopEncoding) - Stopping encoder.
2019-02-15 17:27:17.821487 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:17.973802 N [Commands] MythTV.cpp:224 (StopEncoding) - Encoder stopped
2019-02-15 17:27:18.276101 C [main] hauppauge2.cpp:458 (main) - Done.
2019-02-15 17:27:36.503483 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-15 17:27:36.520346 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-15 17:27:36.520536 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-15 17:27:36.520704 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-15 17:27:36.520844 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-15 17:27:36.520952 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-15 17:27:36.521083 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-15 17:27:36.521222 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-15 17:27:36.528822 N [Commands] MythTV.cpp:254 (send_status) - 7:CloseRecorder: '7:OK:Terminating'
2019-02-15 17:27:36.528925 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:36.529067 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-15 17:27:36.545643 C [main] hauppauge2.cpp:458 (main) - Done.
eb 15 17:27:16 myth-be-01b mythbackend: mythbackend[1824]: E TVRecEvent recorders/streamhandler.cpp:43 (~StreamHandler) SH(/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): dtor & _stream_data_list not empty
root@myth-be-01b:/var/log/mythtv#
Re: Hauppauge HD-PVR2 / Colossus2 support
Feb 15 18:18:49 myth-be-01b mythbackend: mythbackend[11353]: E TVRecEvent recorders/recorderbase.cpp:232 (SetStrOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetStrOption(...recordingtype): Option not in profile.
Feb 15 18:18:49 myth-be-01b mythbackend: mythbackend[11353]: E TVRecEvent recorders/recorderbase.cpp:222 (SetIntOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetIntOption(...recordmpts): Option not in profile.
what are those ?
Feb 15 18:18:49 myth-be-01b mythbackend: mythbackend[11353]: E TVRecEvent recorders/recorderbase.cpp:222 (SetIntOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetIntOption(...recordmpts): Option not in profile.
what are those ?
Re: Hauppauge HD-PVR2 / Colossus2 support
I did it to start and show video that that try
Re: Hauppauge HD-PVR2 / Colossus2 support
well 2nd try did not work
Re: Hauppauge HD-PVR2 / Colossus2 support
it is still failing
Re: Hauppauge HD-PVR2 / Colossus2 support
I would need to see the mythbackend log that corresponds to that hauppuge2 log to diagnose any further.
When you run it from the command line, are you giving it the same options that are listed in the config file that mythtv is using?
When you run it from the command line, are you giving it the same options that are listed in the config file that mythtv is using?
Re: Hauppauge HD-PVR2 / Colossus2 support
yes using the same config file , just changed to dump to a file
do I need to turn up the log level ?
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E ExternSH recorders/dtvsignalmonitor.cpp:323 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Program #0 not found in PAT!#012Program Association Section#012 PSIP tableID(0x0) length(13) extension(0x0)#012 version(0) current(1) section(0) last_section(0)#012 tsid(0) programCount(1)#012 program number 1 has PID 0x0200
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E ExternSH recorders/dtvsignalmonitor.cpp:329 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): But there is only one program in the PAT, so we'll just use it
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: I CoreContext scheduler.cpp:734 (UpdateRecStatus) Updating status for "dish2 reset holder":"2019-02-16 07:29:00" on cardid [21] (Tuning => Recording)
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: I TVRecEvent tv_rec.cpp:4204 (TuningNewRecorder) TVRec[21]: rec->GetPathname(): '/var/lib/mythtv/disk1/recordings/2193_20190216132900.ts'
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: I TVRecEvent tv_rec.cpp:4236 (TuningNewRecorder) TVRec[21]: TuningNewRecorder - CreateRecorder()
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E TVRecEvent recorders/recorderbase.cpp:232 (SetStrOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetStrOption(...recordingtype): Option not in profile.
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E TVRecEvent recorders/recorderbase.cpp:222 (SetIntOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetIntOption(...recordmpts): Option not in profile.
2019-02-16 07:29:00.332820 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:29:00.349803 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:29:00.350052 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:29:00.350242 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:29:00.350372 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:29:00.350528 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:29:00.350656 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:29:00.350803 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:29:00.372043 N [Commands] MythTV.cpp:254 (send_status) - 7:Version?: '7:OK:0.5'
2019-02-16 07:29:00.372643 N [Commands] MythTV.cpp:254 (send_status) - 8:LockTimeout?: '8:OK:12000'
2019-02-16 07:29:00.803304 N [Commands] HauppaugeDev.cpp:502 (Open) - Opening Hauppauge USB device.
2019-02-16 07:29:00.811489 N [Commands] HauppaugeDev.cpp:524 (Open) - FX2 ready after 0 tries.
2019-02-16 07:29:05.009554 N [Commands] HauppaugeDev.cpp:544 (Open) - encDev ready
2019-02-16 07:29:05.009657 N [Commands] HauppaugeDev.cpp:553 (Open) - Using 1080p6050 w/AC3 EDID.
2019-02-16 07:29:05.012170 N [Commands] HauppaugeDev.cpp:576 (Open) - rxDev ready
2019-02-16 07:29:05.012233 N [Commands] HauppaugeDev.cpp:589 (Open) - Hauppauge USB device ready.
2019-02-16 07:29:05.012378 N [Commands] MythTV.cpp:254 (send_status) - 9:SignalStrengthPercent?: '9:OK:100'
2019-02-16 07:29:07.014668 N [Commands] MythTV.cpp:254 (send_status) - 10:SignalStrengthPercent?: '10:OK:100'
2019-02-16 07:29:07.014818 N [Commands] MythTV.cpp:254 (send_status) - 11:SignalStrengthPercent?: '11:OK:100'
2019-02-16 07:29:07.014987 N [Commands] MythTV.cpp:254 (send_status) - 12:HasLock?: '12:OK:Yes'
2019-02-16 07:29:07.015676 N [Commands] MythTV.cpp:254 (send_status) - 13:IsOpen?: '13:OK:Open'
2019-02-16 07:29:07.015890 N [Commands] MythTV.cpp:254 (send_status) - 14:Version?: '14:OK:0.5'
2019-02-16 07:29:07.646359 N [Commands] HauppaugeDev.cpp:129 (set_input_format) - Input width: 1920 height: 1080 interlaced: 1 vFreq: 60 audio SR: 0
2019-02-16 07:29:07.653498 N [Commands] HauppaugeDev.cpp:152 (set_input_format) - Audio Input set to S/PDIF
2019-02-16 07:29:07.653580 N [Commands] HauppaugeDev.cpp:221 (set_input_format) - Audio codec: AC3
2019-02-16 07:29:07.653634 N [Commands] FlipInterlacedFields.cpp:19 (FlipHDMIFields) - HDMI: flipping field order.
2019-02-16 07:29:08.168951 N [Commands] HauppaugeDev.cpp:370 (init_component) - Component video input initialized.
2019-02-16 07:29:09.338741 N [Commands] MythTV.cpp:254 (send_status) - 15:StartStreaming: '15:OK:Started'
2019-02-16 07:29:09.339750 N [Commands] MythTV.cpp:254 (send_status) - 16:XON: '16:OK'
2019-02-16 07:29:10.705220 N [Commands] MythTV.cpp:254 (send_status) - 17:Version?: '17:OK:0.5'
2019-02-16 07:29:10.705472 N [Commands] MythTV.cpp:254 (send_status) - 18:XOFF: '18:OK'
2019-02-16 07:29:10.719465 N [Commands] MythTV.cpp:254 (send_status) - 19:XON: '19:OK'
2019-02-16 07:34:01.013802 N [Buffer] MythTV.cpp:573 (Run) - Count: 4706, Empty cnt: 4678, Written: 308412416, Total: 308412416
2019-02-16 07:35:00.031897 N [Commands] MythTV.cpp:254 (send_status) - 20:Version?: '20:OK:0.5'
2019-02-16 07:35:00.032049 N [Commands] MythTV.cpp:216 (StopEncoding) - Stopping encoder.
2019-02-16 07:35:01.593215 N [Commands] MythTV.cpp:224 (StopEncoding) - Encoder stopped
2019-02-16 07:35:01.593389 N [Commands] MythTV.cpp:254 (send_status) - 21:StopStreaming: '21:OK:Stopped'
2019-02-16 07:35:01.647487 N [Commands] MythTV.cpp:254 (send_status) - 22:CloseRecorder: '22:OK:Terminating'
2019-02-16 07:35:01.647581 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:35:01.647702 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:35:01.975310 C [main] hauppauge2.cpp:458 (main) - Done.
2019-02-16 07:40:06.041110 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:40:06.057861 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:40:06.058113 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:40:06.058264 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:40:06.058397 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:40:06.058535 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:40:06.058666 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:40:06.058824 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:40:06.874512 N [Commands] MythTV.cpp:254 (send_status) - 7:Version?: '7:OK:0.5'
2019-02-16 07:40:06.874934 N [Commands] MythTV.cpp:254 (send_status) - 8:LockTimeout?: '8:OK:12000'
2019-02-16 07:40:07.307262 N [Commands] HauppaugeDev.cpp:502 (Open) - Opening Hauppauge USB device.
2019-02-16 07:40:07.315368 N [Commands] HauppaugeDev.cpp:524 (Open) - FX2 ready after 0 tries.
2019-02-16 07:40:11.498853 N [Commands] HauppaugeDev.cpp:544 (Open) - encDev ready
2019-02-16 07:40:11.498959 N [Commands] HauppaugeDev.cpp:553 (Open) - Using 1080p6050 w/AC3 EDID.
2019-02-16 07:40:11.501575 N [Commands] HauppaugeDev.cpp:576 (Open) - rxDev ready
2019-02-16 07:40:11.501641 N [Commands] HauppaugeDev.cpp:589 (Open) - Hauppauge USB device ready.
2019-02-16 07:40:11.501781 N [Commands] MythTV.cpp:254 (send_status) - 9:SignalStrengthPercent?: '9:OK:100'
2019-02-16 07:40:13.504115 N [Commands] MythTV.cpp:254 (send_status) - 10:SignalStrengthPercent?: '10:OK:100'
2019-02-16 07:40:13.504248 N [Commands] MythTV.cpp:254 (send_status) - 11:SignalStrengthPercent?: '11:OK:100'
2019-02-16 07:40:13.504352 N [Commands] MythTV.cpp:254 (send_status) - 12:HasLock?: '12:OK:Yes'
2019-02-16 07:40:13.504894 N [Commands] MythTV.cpp:254 (send_status) - 13:IsOpen?: '13:OK:Open'
2019-02-16 07:40:13.505118 N [Commands] MythTV.cpp:254 (send_status) - 14:Version?: '14:OK:0.5'
2019-02-16 07:40:14.136984 N [Commands] HauppaugeDev.cpp:129 (set_input_format) - Input width: 1920 height: 1080 interlaced: 1 vFreq: 60 audio SR: 0
2019-02-16 07:40:14.144134 N [Commands] HauppaugeDev.cpp:152 (set_input_format) - Audio Input set to S/PDIF
2019-02-16 07:40:14.144214 N [Commands] HauppaugeDev.cpp:221 (set_input_format) - Audio codec: AC3
2019-02-16 07:40:14.144268 N [Commands] FlipInterlacedFields.cpp:19 (FlipHDMIFields) - HDMI: flipping field order.
2019-02-16 07:40:14.657523 N [Commands] HauppaugeDev.cpp:370 (init_component) - Component video input initialized.
2019-02-16 07:40:15.556426 N [Commands] MythTV.cpp:254 (send_status) - 15:StartStreaming: '15:OK:Started'
2019-02-16 07:40:15.557095 N [Commands] MythTV.cpp:254 (send_status) - 16:XON: '16:OK'
2019-02-16 07:40:25.083850 N [Commands] MythTV.cpp:254 (send_status) - 17:CloseRecorder: '17:OK:Terminating'
2019-02-16 07:40:25.083947 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:25.084014 N [Commands] MythTV.cpp:216 (StopEncoding) - Stopping encoder.
2019-02-16 07:40:26.058449 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:26.626584 N [Commands] MythTV.cpp:224 (StopEncoding) - Encoder stopped
2019-02-16 07:40:45.716438 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:40:45.733125 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:40:45.733368 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:40:45.733506 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:40:45.733638 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:40:45.733774 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:40:45.733910 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:40:45.734017 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:40:45.741440 N [Commands] MythTV.cpp:254 (send_status) - 7:CloseRecorder: '7:OK:Terminating'
2019-02-16 07:40:45.741539 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:45.741641 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:45.758413 C [main] hauppauge2.cpp:458 (main) - Done.
2019-02-16 07:45:03.017563 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:45:03.034296 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:45:03.034498 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:45:03.034642 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:45:03.034770 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:45:03.034901 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:45:03.035030 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:45:03.035190 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:45:03.042686 N [Commands] MythTV.cpp:254 (send_status) - 7:CloseRecorder: '7:OK:Terminating'
2019-02-16 07:45:03.042785 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:45:03.042882 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:45:03.059680 C [main] hauppauge2.cpp:458 (main) - Done.
do I need to turn up the log level ?
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E ExternSH recorders/dtvsignalmonitor.cpp:323 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): Program #0 not found in PAT!#012Program Association Section#012 PSIP tableID(0x0) length(13) extension(0x0)#012 version(0) current(1) section(0) last_section(0)#012 tsid(0) programCount(1)#012 program number 1 has PID 0x0200
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E ExternSH recorders/dtvsignalmonitor.cpp:329 (HandlePAT) DTVSigMon[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): But there is only one program in the PAT, so we'll just use it
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: I CoreContext scheduler.cpp:734 (UpdateRecStatus) Updating status for "dish2 reset holder":"2019-02-16 07:29:00" on cardid [21] (Tuning => Recording)
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: I TVRecEvent tv_rec.cpp:4204 (TuningNewRecorder) TVRec[21]: rec->GetPathname(): '/var/lib/mythtv/disk1/recordings/2193_20190216132900.ts'
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: I TVRecEvent tv_rec.cpp:4236 (TuningNewRecorder) TVRec[21]: TuningNewRecorder - CreateRecorder()
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E TVRecEvent recorders/recorderbase.cpp:232 (SetStrOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetStrOption(...recordingtype): Option not in profile.
Feb 16 07:29:10 myth-be-01b mythbackend: mythbackend[13102]: E TVRecEvent recorders/recorderbase.cpp:222 (SetIntOption) RecBase[21](/opt/Hauppauge/bin/hauppauge2 -c /etc/mythtv/Colossus1.conf): SetIntOption(...recordmpts): Option not in profile.
2019-02-16 07:29:00.332820 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:29:00.349803 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:29:00.350052 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:29:00.350242 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:29:00.350372 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:29:00.350528 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:29:00.350656 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:29:00.350803 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:29:00.372043 N [Commands] MythTV.cpp:254 (send_status) - 7:Version?: '7:OK:0.5'
2019-02-16 07:29:00.372643 N [Commands] MythTV.cpp:254 (send_status) - 8:LockTimeout?: '8:OK:12000'
2019-02-16 07:29:00.803304 N [Commands] HauppaugeDev.cpp:502 (Open) - Opening Hauppauge USB device.
2019-02-16 07:29:00.811489 N [Commands] HauppaugeDev.cpp:524 (Open) - FX2 ready after 0 tries.
2019-02-16 07:29:05.009554 N [Commands] HauppaugeDev.cpp:544 (Open) - encDev ready
2019-02-16 07:29:05.009657 N [Commands] HauppaugeDev.cpp:553 (Open) - Using 1080p6050 w/AC3 EDID.
2019-02-16 07:29:05.012170 N [Commands] HauppaugeDev.cpp:576 (Open) - rxDev ready
2019-02-16 07:29:05.012233 N [Commands] HauppaugeDev.cpp:589 (Open) - Hauppauge USB device ready.
2019-02-16 07:29:05.012378 N [Commands] MythTV.cpp:254 (send_status) - 9:SignalStrengthPercent?: '9:OK:100'
2019-02-16 07:29:07.014668 N [Commands] MythTV.cpp:254 (send_status) - 10:SignalStrengthPercent?: '10:OK:100'
2019-02-16 07:29:07.014818 N [Commands] MythTV.cpp:254 (send_status) - 11:SignalStrengthPercent?: '11:OK:100'
2019-02-16 07:29:07.014987 N [Commands] MythTV.cpp:254 (send_status) - 12:HasLock?: '12:OK:Yes'
2019-02-16 07:29:07.015676 N [Commands] MythTV.cpp:254 (send_status) - 13:IsOpen?: '13:OK:Open'
2019-02-16 07:29:07.015890 N [Commands] MythTV.cpp:254 (send_status) - 14:Version?: '14:OK:0.5'
2019-02-16 07:29:07.646359 N [Commands] HauppaugeDev.cpp:129 (set_input_format) - Input width: 1920 height: 1080 interlaced: 1 vFreq: 60 audio SR: 0
2019-02-16 07:29:07.653498 N [Commands] HauppaugeDev.cpp:152 (set_input_format) - Audio Input set to S/PDIF
2019-02-16 07:29:07.653580 N [Commands] HauppaugeDev.cpp:221 (set_input_format) - Audio codec: AC3
2019-02-16 07:29:07.653634 N [Commands] FlipInterlacedFields.cpp:19 (FlipHDMIFields) - HDMI: flipping field order.
2019-02-16 07:29:08.168951 N [Commands] HauppaugeDev.cpp:370 (init_component) - Component video input initialized.
2019-02-16 07:29:09.338741 N [Commands] MythTV.cpp:254 (send_status) - 15:StartStreaming: '15:OK:Started'
2019-02-16 07:29:09.339750 N [Commands] MythTV.cpp:254 (send_status) - 16:XON: '16:OK'
2019-02-16 07:29:10.705220 N [Commands] MythTV.cpp:254 (send_status) - 17:Version?: '17:OK:0.5'
2019-02-16 07:29:10.705472 N [Commands] MythTV.cpp:254 (send_status) - 18:XOFF: '18:OK'
2019-02-16 07:29:10.719465 N [Commands] MythTV.cpp:254 (send_status) - 19:XON: '19:OK'
2019-02-16 07:34:01.013802 N [Buffer] MythTV.cpp:573 (Run) - Count: 4706, Empty cnt: 4678, Written: 308412416, Total: 308412416
2019-02-16 07:35:00.031897 N [Commands] MythTV.cpp:254 (send_status) - 20:Version?: '20:OK:0.5'
2019-02-16 07:35:00.032049 N [Commands] MythTV.cpp:216 (StopEncoding) - Stopping encoder.
2019-02-16 07:35:01.593215 N [Commands] MythTV.cpp:224 (StopEncoding) - Encoder stopped
2019-02-16 07:35:01.593389 N [Commands] MythTV.cpp:254 (send_status) - 21:StopStreaming: '21:OK:Stopped'
2019-02-16 07:35:01.647487 N [Commands] MythTV.cpp:254 (send_status) - 22:CloseRecorder: '22:OK:Terminating'
2019-02-16 07:35:01.647581 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:35:01.647702 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:35:01.975310 C [main] hauppauge2.cpp:458 (main) - Done.
2019-02-16 07:40:06.041110 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:40:06.057861 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:40:06.058113 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:40:06.058264 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:40:06.058397 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:40:06.058535 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:40:06.058666 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:40:06.058824 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:40:06.874512 N [Commands] MythTV.cpp:254 (send_status) - 7:Version?: '7:OK:0.5'
2019-02-16 07:40:06.874934 N [Commands] MythTV.cpp:254 (send_status) - 8:LockTimeout?: '8:OK:12000'
2019-02-16 07:40:07.307262 N [Commands] HauppaugeDev.cpp:502 (Open) - Opening Hauppauge USB device.
2019-02-16 07:40:07.315368 N [Commands] HauppaugeDev.cpp:524 (Open) - FX2 ready after 0 tries.
2019-02-16 07:40:11.498853 N [Commands] HauppaugeDev.cpp:544 (Open) - encDev ready
2019-02-16 07:40:11.498959 N [Commands] HauppaugeDev.cpp:553 (Open) - Using 1080p6050 w/AC3 EDID.
2019-02-16 07:40:11.501575 N [Commands] HauppaugeDev.cpp:576 (Open) - rxDev ready
2019-02-16 07:40:11.501641 N [Commands] HauppaugeDev.cpp:589 (Open) - Hauppauge USB device ready.
2019-02-16 07:40:11.501781 N [Commands] MythTV.cpp:254 (send_status) - 9:SignalStrengthPercent?: '9:OK:100'
2019-02-16 07:40:13.504115 N [Commands] MythTV.cpp:254 (send_status) - 10:SignalStrengthPercent?: '10:OK:100'
2019-02-16 07:40:13.504248 N [Commands] MythTV.cpp:254 (send_status) - 11:SignalStrengthPercent?: '11:OK:100'
2019-02-16 07:40:13.504352 N [Commands] MythTV.cpp:254 (send_status) - 12:HasLock?: '12:OK:Yes'
2019-02-16 07:40:13.504894 N [Commands] MythTV.cpp:254 (send_status) - 13:IsOpen?: '13:OK:Open'
2019-02-16 07:40:13.505118 N [Commands] MythTV.cpp:254 (send_status) - 14:Version?: '14:OK:0.5'
2019-02-16 07:40:14.136984 N [Commands] HauppaugeDev.cpp:129 (set_input_format) - Input width: 1920 height: 1080 interlaced: 1 vFreq: 60 audio SR: 0
2019-02-16 07:40:14.144134 N [Commands] HauppaugeDev.cpp:152 (set_input_format) - Audio Input set to S/PDIF
2019-02-16 07:40:14.144214 N [Commands] HauppaugeDev.cpp:221 (set_input_format) - Audio codec: AC3
2019-02-16 07:40:14.144268 N [Commands] FlipInterlacedFields.cpp:19 (FlipHDMIFields) - HDMI: flipping field order.
2019-02-16 07:40:14.657523 N [Commands] HauppaugeDev.cpp:370 (init_component) - Component video input initialized.
2019-02-16 07:40:15.556426 N [Commands] MythTV.cpp:254 (send_status) - 15:StartStreaming: '15:OK:Started'
2019-02-16 07:40:15.557095 N [Commands] MythTV.cpp:254 (send_status) - 16:XON: '16:OK'
2019-02-16 07:40:25.083850 N [Commands] MythTV.cpp:254 (send_status) - 17:CloseRecorder: '17:OK:Terminating'
2019-02-16 07:40:25.083947 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:25.084014 N [Commands] MythTV.cpp:216 (StopEncoding) - Stopping encoder.
2019-02-16 07:40:26.058449 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:26.626584 N [Commands] MythTV.cpp:224 (StopEncoding) - Encoder stopped
2019-02-16 07:40:45.716438 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:40:45.733125 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:40:45.733368 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:40:45.733506 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:40:45.733638 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:40:45.733774 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:40:45.733910 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:40:45.734017 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:40:45.741440 N [Commands] MythTV.cpp:254 (send_status) - 7:CloseRecorder: '7:OK:Terminating'
2019-02-16 07:40:45.741539 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:45.741641 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:40:45.758413 C [main] hauppauge2.cpp:458 (main) - Done.
2019-02-16 07:45:03.017563 C [main] hauppauge2.cpp:346 (main) - Initializing [Bus: 2, Port: 1] E585-00-00D6437D
2019-02-16 07:45:03.034296 N [Commands] MythTV.cpp:254 (send_status) - APIVersion?: ':OK:2'
2019-02-16 07:45:03.034498 N [Commands] MythTV.cpp:254 (send_status) - 1:APIVersion:2: '1:OK:API Version 2'
2019-02-16 07:45:03.034642 N [Commands] MythTV.cpp:254 (send_status) - 2:Version?: '2:OK:0.5'
2019-02-16 07:45:03.034770 N [Commands] MythTV.cpp:254 (send_status) - 3:HasTuner?: '3:OK:No'
2019-02-16 07:45:03.034901 N [Commands] MythTV.cpp:254 (send_status) - 4:HasPictureAttributes?: '4:OK:No'
2019-02-16 07:45:03.035030 N [Commands] MythTV.cpp:254 (send_status) - 5:FlowControl?: '5:OK:XON/XOFF'
2019-02-16 07:45:03.035190 N [Commands] MythTV.cpp:254 (send_status) - 6:BlockSize:6160384: '6:OK'
2019-02-16 07:45:03.042686 N [Commands] MythTV.cpp:254 (send_status) - 7:CloseRecorder: '7:OK:Terminating'
2019-02-16 07:45:03.042785 C [Commands] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:45:03.042882 C [main] MythTV.cpp:66 (Terminate) - Terminating.
2019-02-16 07:45:03.059680 C [main] hauppauge2.cpp:458 (main) - Done.