setup
Moderator: Forum Moderators
Re: setup
Worked as planned. The output is in /tmp and can be attached here.
The problem is likely the same, just more info in the log. If you've
done a cold boot or restart since the above, then the file is gone and
you have to repeat the command above.
The problem is likely the same, just more info in the log. If you've
done a cold boot or restart since the above, then the file is gone and
you have to repeat the command above.
Re: setup
OK
Just to make sure I have everything set up properly, here are the settings I have entered in myth tv setup
1. General
Host Address Backup Setup
port 6543
Status port 6544
Security Pin 0000
Allow connections from all subnets blank
Listen on All IP Addresses checked
Primary IP address/DMS name 127.0.0.1
This server is the Master Backend checked
Locale Settings
TV format NTSC
VBI format none
Channel frequency table us-bcast
Miscellaneous Settings
File management settings
Master backend override checked
follow symbolic links when deleting files blank
delete files slowly blank
HD ringbuffre size 9400
Storage group scheduler balanced free space
EIT transport timeout 5
Backend idel before eit crawl 60
Backend wakeup settings
Master
delay between wake attempts 4uup0 seconds
Wake attempts 5
Wake command upnatum
2 captuer cards hdhomerun 192.168.1.3-0
4. Video sources
SchedulesDirect
video source name ScheduleDirect
Listings grabber North America (SchedulesDirect.gor) (internal)
Channel frequency table default
network ID -1
5. input connections
[HDHOMERUN: 192.168.1.3-0] (MPEG2TS)
input name MPEG2TS
display name (optional) blank
Video Source SchedulesDirect
Use quick tuning never
Starting channel 1
Just to make sure I have everything set up properly, here are the settings I have entered in myth tv setup
1. General
Host Address Backup Setup
port 6543
Status port 6544
Security Pin 0000
Allow connections from all subnets blank
Listen on All IP Addresses checked
Primary IP address/DMS name 127.0.0.1
This server is the Master Backend checked
Locale Settings
TV format NTSC
VBI format none
Channel frequency table us-bcast
Miscellaneous Settings
File management settings
Master backend override checked
follow symbolic links when deleting files blank
delete files slowly blank
HD ringbuffre size 9400
Storage group scheduler balanced free space
EIT transport timeout 5
Backend idel before eit crawl 60
Backend wakeup settings
Master
delay between wake attempts 4uup0 seconds
Wake attempts 5
Wake command upnatum
2 captuer cards hdhomerun 192.168.1.3-0
4. Video sources
SchedulesDirect
video source name ScheduleDirect
Listings grabber North America (SchedulesDirect.gor) (internal)
Channel frequency table default
network ID -1
5. input connections
[HDHOMERUN: 192.168.1.3-0] (MPEG2TS)
input name MPEG2TS
display name (optional) blank
Video Source SchedulesDirect
Use quick tuning never
Starting channel 1
Re: setup
If that refers to the: "Master delay between wakeup attempts 40 seconds"
above, then no, it isn't likely the solution (you can change it back to 0
seconds to prove it.)
Watch TV not working
When I hit Watch TV, a small screen that says please wait comes up momentarily then disappears. No TV follows. What do I need to do to correct this. I have an HDHOMERUN decoder working over wifi and in the past it has worked fine.