[SOLVED]Raspberry Pi 3 Model B+
[SOLVED]Raspberry Pi 3 Model B+
Today I received the new Raspberry Pi 3 Model B+ and installed latest Raspbian from 2018-03-13-raspbian-stretch.zip together with mythtv-light and mythplugins-light (version v30-Pre-320-geff97292d3).
mythfrontend fails silently when run from Sound & Video menu
When run from a terminal I get :
mythfrontend: error while loading shared libraries: libGLESv2.so: cannot open shared object file: No such file or directory
mythfrontend works after
sudo apt update
sudo rpi-update
sudo reboot
The instructions at https://www.mythtv.org/wiki/MythTV_Light
indicate rpi-update is only necessary for August 2017 version of Raspbian Stretch. Note that sudo apt dist-upgrade is not required
Just for reference the Raspbian install gave:
pi@pi3plus:~ $ uname -a
Linux pi3plus 4.9.80-v7+ #1098 SMP Fri Mar 9 19:11:42 GMT 2018 armv7l GNU/Linux
pi@pi3plus:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.3 (stretch)
Release: 9.3
Codename: stretch
After rpi-update uname -a gives
Linux pi3plus 4.14.26-v7+ #1099 SMP Wed Mar 14 14:59:28 GMT 2018 armv7l GNU/Linux
Mike
mythfrontend fails silently when run from Sound & Video menu
When run from a terminal I get :
mythfrontend: error while loading shared libraries: libGLESv2.so: cannot open shared object file: No such file or directory
mythfrontend works after
sudo apt update
sudo rpi-update
sudo reboot
The instructions at https://www.mythtv.org/wiki/MythTV_Light
indicate rpi-update is only necessary for August 2017 version of Raspbian Stretch. Note that sudo apt dist-upgrade is not required
Just for reference the Raspbian install gave:
pi@pi3plus:~ $ uname -a
Linux pi3plus 4.9.80-v7+ #1098 SMP Fri Mar 9 19:11:42 GMT 2018 armv7l GNU/Linux
pi@pi3plus:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.3 (stretch)
Release: 9.3
Codename: stretch
After rpi-update uname -a gives
Linux pi3plus 4.14.26-v7+ #1099 SMP Wed Mar 14 14:59:28 GMT 2018 armv7l GNU/Linux
Mike
Last edited by MikeB2013 on Sun Mar 18, 2018 11:34 am, edited 1 time in total.
Re: Raspberry Pi 3 Model B+
To find the release date of your raspbian use
I have not tried later versions, so I don't know if the problem was fixed. I was told it would be fixed in the next build after August 2017, but maybe it was not.
Code: Select all
cat /etc/rpi-issue
Re: Raspberry Pi 3 Model B+
pi@pi3plus:~ $ cat /etc/rpi-issue
Raspberry Pi reference 2018-03-13
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 00013d7972122d1304aacda8fff5098f073ceb43, stage5
Raspberry Pi reference 2018-03-13
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 00013d7972122d1304aacda8fff5098f073ceb43, stage5
Re: Raspberry Pi 3 Model B+
Peter,
I note the update to mythtv-light wiki about removing 30 builds.
I have done this, but there is something strange going on.
I forced install of 30~Pre-403-g50b4e2cb04-0 500 because apt wanted to install 30-Pre-249-g3e23c17fe0-0 500.
Now apt update/upgrade wants to install 30-Pre-249-g3e23c17fe0-0 500
Thanks for all your hard work on mythtv-light.
Mike
I note the update to mythtv-light wiki about removing 30 builds.
I have done this, but there is something strange going on.
I forced install of 30~Pre-403-g50b4e2cb04-0 500 because apt wanted to install 30-Pre-249-g3e23c17fe0-0 500.
Code: Select all
pi@pi3plus:~ $ apt policy mythtv-light
mythtv-light:
Installed: 30~Pre-403-g50b4e2cb04-0
Candidate: 30-Pre-249-g3e23c17fe0-0
Version table:
30-Pre-249-g3e23c17fe0-0 500
500 http://dl.bintray.com/bennettpeter/deb stretch/myth30 armhf Packages
*** 30~Pre-403-g50b4e2cb04-0 500
500 http://dl.bintray.com/bennettpeter/deb stretch/myth30 armhf Packages
100 /var/lib/dpkg/status
Code: Select all
pi@pi3plus:~ $ sudo apt update
Hit:1 http://archive.raspberrypi.org/debian stretch InRelease
Hit:2 http://mirrordirector.raspbian.org/raspbian stretch InRelease
Ign:3 http://dl.bintray.com/bennettpeter/deb stretch InRelease
Hit:4 http://dl.bintray.com/bennettpeter/deb stretch Release
Reading package lists... Done
Building dependency tree
Reading state information... Done
2 packages can be upgraded. Run 'apt list --upgradable' to see them.
pi@pi3plus:~ $ sudo apt list --upgradable
Listing... Done
mythplugins-light/stretch 30-Pre-249-g3e23c17fe0-0 armhf [upgradable from: 30~Pre-403-g50b4e2cb04-0]
mythtv-light/stretch 30-Pre-249-g3e23c17fe0-0 armhf [upgradable from: 30~Pre-403-g50b4e2cb04-0]
Thanks for all your hard work on mythtv-light.
Mike
Re: Raspberry Pi 3 Model B+
Thank you for pointing that out. I had deleted 30-Pre-249 from the repository because of this issue but by mistake I only deleted the one for Jessie. I have deleted the stretch one now as well, so this should not happen any more.
Re: Raspberry Pi 3 Model B+
Almost there, mythplugins-light needs adjustment for stretch :
Mike
Code: Select all
pi@pi3plus:~ $ sudo apt update
Hit:1 http://mirrordirector.raspbian.org/raspbian stretch InRelease
Hit:2 http://archive.raspberrypi.org/debian stretch InRelease
Ign:3 http://dl.bintray.com/bennettpeter/deb stretch InRelease
Hit:4 http://dl.bintray.com/bennettpeter/deb stretch Release
Reading package lists... Done
Building dependency tree
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.
pi@pi3plus:~ $ apt list --upgradable -a
Listing... Done
mythplugins-light/stretch 30-Pre-249-g3e23c17fe0-0 armhf [upgradable from: 30~Pre-403-g50b4e2cb04-0]
mythplugins-light/stretch 30-Pre-30-gad3fc1b88c-0 armhf
mythplugins-light/stretch,now 30~Pre-403-g50b4e2cb04-0 armhf [installed,upgradable to: 30-Pre-249-g3e23c17fe0-0]
Re: Raspberry Pi 3 Model B+
Sorry - I missed the plugins - should be OK now
Re: Raspberry Pi 3 Model B+
Peter,
All fixed now.
Thank you
Mike
All fixed now.
Thank you
Mike
Re: [SOLVED]Raspberry Pi 3 Model B+
Hi....i am a new user here. As per my knowledge the updated CPU is really the same as that in the 3B, only with some optimizations to power delivery and thermal management. Also, the on-board power management circuitry is improved. This basically allows the 3B+ to run stable at the same speed the 3B might overclock to on a good day. The RPi blog has all the details on the new board.The real reasons to get the 3B+ over the 3B are the vastly improved networking and those limited cases where PoE would be useful.