So, what should I be looking at to track this down? I think I have the config.xml files configured the same on both machines, so they point to the "master" server. Well, there is one exception: the line "<LocalHostName>********</LocalHostName>" is different on the client files of both machines.
"mythtv user on master machine"
Code: Select all
<Configuration>
<Database>
<PingHost>1</PingHost>
<Host>192.168.1.109</Host>
<UserName>mythtv</UserName>
<Password>mythtv</Password>
<DatabaseName>mythconverg</DatabaseName>
<Port>3306</Port>
</Database>
<WakeOnLAN>
<Enabled>0</Enabled>
<SQLReconnectWaitTime>0</SQLReconnectWaitTime>
<SQLConnectRetry>5</SQLConnectRetry>
<Command>echo 'WOLsqlServerCommand not set'</Command>
</WakeOnLAN>
</Configuration>
"client on master machine"
Code: Select all
<Configuration>
<LocalHostName>musem</LocalHostName>
<Database>
<PingHost>1</PingHost>
<Host>192.168.1.109</Host>
<UserName>mythtv</UserName>
<Password>mythtv</Password>
<DatabaseName>mythconverg</DatabaseName>
<Port>3306</Port>
</Database>
<WakeOnLAN>
<Enabled>0</Enabled>
<SQLReconnectWaitTime>0</SQLReconnectWaitTime>
<SQLConnectRetry>5</SQLConnectRetry>
<Command>echo 'WOLsqlServerCommand not set'</Command>
</WakeOnLAN>
<UPnP>
<UDN>
<MediaRenderer>651c8daa-44c3-41d2-a7ab-543cc5361abe</MediaRenderer>
</UDN>
</UPnP>
</Configuration>
"mythtv user on client machine"
Code: Select all
<Configuration>
<Database>
<PingHost>1</PingHost>
<Host>192.168.1.109</Host>
<UserName>mythtv</UserName>
<Password>mythtv</Password>
<DatabaseName>mythconverg</DatabaseName>
<Port>3306</Port>
</Database>
<WakeOnLAN>
<Enabled>0</Enabled>
<SQLReconnectWaitTime>0</SQLReconnectWaitTime>
<SQLConnectRetry>5</SQLConnectRetry>
<Command>echo 'WOLsqlServerCommand not set'</Command>
</WakeOnLAN>
</Configuration>
Code: Select all
<Configuration>
<LocalHostName>wendy</LocalHostName>
<Database>
<PingHost>1</PingHost>
<Host>192.168.1.109</Host>
<UserName>mythtv</UserName>
<Password>mythtv</Password>
<DatabaseName>mythconverg</DatabaseName>
<Port>3306</Port>
</Database>
<WakeOnLAN>
<Enabled>0</Enabled>
<SQLReconnectWaitTime>0</SQLReconnectWaitTime>
<SQLConnectRetry>5</SQLConnectRetry>
<Command>echo 'WOLsqlServerCommand not set'</Command>
</WakeOnLAN>
<UPnP>
<UDN>
<MediaRenderer>15ad5d7d-7aaa-4961-a714-ea061fb65803</MediaRenderer>
</UDN>
</UPnP>
</Configuration>