Backend setup, Capture Cards, New Capture Card, Card Type, HD HOMERUN Networked Tuner then shows "Use HD HOMERUN 2010164E (hdhomerun3_cable card 192.168.52.255). This doesn't seem correct since this is a two tuners device. Selecting this and proceeding through setup to input connections fetching channels from listing source (Schedules direct which has been properly set up) no channels are set up and my install is stopped here.
The cable card tuner has been set up and going to hdhomerun_config_guide in terminal I am able to scan and view channels from Spectrum on VLC.
I love mythtv and have used successfully until I did and upgrade/update which broke it. I have never been able to recover!
I am so close I would appreciate some help.
Hauppauge Win dcr 2650 connection problem
Moderator: Forum Moderators
Re: Hauppauge Win dcr 2650 connection problem
I had a 2650 many moons ago. I used mythfilldatabase in a terminal to create the channels, but it should be possible to do it automatically using Schedules Direct.
viewtopic.php?f=36&t=1102&p=5724#p5724
viewtopic.php?f=36&t=1102&p=5724#p5724
Ted | My blog
Re: Hauppauge Win dcr 2650 connection problem
Thanks for the reply but I think the first order of business is getting the backend setup to recognize the two tuners in the 2650.
Re: Hauppauge Win dcr 2650 connection problem
I think I have found my problem. From hdhomerun_config log:
19700101-00:00:00 System: reset reason = power on
19700101-00:00:00 System: network link usb
19700101-00:00:01 CableCARD: M-CARD inserted
19700101-00:00:05 CableCARD: Motorola card (0000:0625)
19700101-00:00:05 CableCARD: authentication status: authentication in progress
19700101-00:00:05 CableCARD: authentication status: authentication success, validation success
20211126-17:29:28 CableCARD: time changed from Thu Jan 01 00:00:21 1970 to Fri Nov 26 17:29:28 2021
20211126-17:29:40 System: myhdhomerun_sync: webclient error (dns failed)
20211126-17:39:07 System: myhdhomerun_sync: webclient error (dns failed)
20211126-17:48:13 System: myhdhomerun_sync: webclient error (dns failed)
20211126-17:58:32 System: myhdhomerun_sync: webclient error (dns failed)
20211126-18:08:03 Tuner: tuner0 tuning 530 TNTHD (auto:57MHz-11911)
20211126-18:08:03 Tuner: tuner0 streaming rtp to 192.168.52.226:53086
20211126-18:08:03 CableCARD: tuner0 530 TNTHD (auto:57MHz-11911) access = subscribed
I see dns failed.
Any suggestions?
19700101-00:00:00 System: reset reason = power on
19700101-00:00:00 System: network link usb
19700101-00:00:01 CableCARD: M-CARD inserted
19700101-00:00:05 CableCARD: Motorola card (0000:0625)
19700101-00:00:05 CableCARD: authentication status: authentication in progress
19700101-00:00:05 CableCARD: authentication status: authentication success, validation success
20211126-17:29:28 CableCARD: time changed from Thu Jan 01 00:00:21 1970 to Fri Nov 26 17:29:28 2021
20211126-17:29:40 System: myhdhomerun_sync: webclient error (dns failed)
20211126-17:39:07 System: myhdhomerun_sync: webclient error (dns failed)
20211126-17:48:13 System: myhdhomerun_sync: webclient error (dns failed)
20211126-17:58:32 System: myhdhomerun_sync: webclient error (dns failed)
20211126-18:08:03 Tuner: tuner0 tuning 530 TNTHD (auto:57MHz-11911)
20211126-18:08:03 Tuner: tuner0 streaming rtp to 192.168.52.226:53086
20211126-18:08:03 CableCARD: tuner0 530 TNTHD (auto:57MHz-11911) access = subscribed
I see dns failed.
Any suggestions?
Re: Hauppauge Win dcr 2650 connection problem
It's normal for the 2650 be to be detected as an HDHR Prime. The 3 is just part of the name.This doesn't seem correct since this is a two tuners device.
I'd check that the 2650 is working correctly by installing Kodi and the official SiliconDust free Kodi addon. There was previously a live tv addon. I remember that it recognized the 2650 as a HDHR device. I don't know for sure if the current addon will do the same, but I'm thinking it will. If it works in Kodi, it should work in MythTV.
Ted | My blog