Secundary Backend

Have a MythTV related problem? Ask for help from other MythTV users here.

Moderator: Forum Moderators

Post Reply
Peque
Junior
Posts: 17
Joined: Thu Jun 29, 2017 8:55 am
Denmark

Secundary Backend

Post by Peque »

Hello Guys.
I've been using MythTV for some time now - And have just updated my system to 0.29+
Normally I have 1 Master Backend with 3 Tuners Attached - But now I got an Extra Tunercard - and would like to add this as Secondary Backend.

Well I downloaded and compiled the Secondary master as I did on the Primary
I'm starting MythTV setup - and configuring the Secondary Master Backend - Seperate it'll show the Tunercard

But I cannot see it through my Master Backend

Code: Select all

root@SecCore:~# 2018-02-25 07:14:49.974152 C  mythbackend version: fixes/29 [v29.1] www.mythtv.org
2018-02-25 07:14:49.974240 C  Qt version: compile: 5.7.1, runtime: 5.7.1
2018-02-25 07:14:49.974253 N  Enabled verbose msgs:  general
2018-02-25 07:14:49.974283 N  Setting Log Level to LOG_INFO
2018-02-25 07:14:49.986689 I  Added logging to the console
2018-02-25 07:14:49.988900 I  Setup Afbrudt handler
2018-02-25 07:14:49.988941 I  Setup Termineret handler
2018-02-25 07:14:49.988965 I  Setup Segmentfejl handler
2018-02-25 07:14:49.988981 I  Setup Afbrudt (SIGABRT) handler
2018-02-25 07:14:49.988998 I  Setup Busfejl handler
2018-02-25 07:14:49.989016 I  Setup Undtagelsestilfælde ved flydende taloperation handler
2018-02-25 07:14:49.989036 I  Setup Ulovlig instruktion (SIGILL) handler
2018-02-25 07:14:49.989065 I  Setup Realtid-signal 0 handler
2018-02-25 07:14:49.989087 I  Setup Læg på (SIGHUP) handler
2018-02-25 07:14:49.989304 N  Using runtime prefix = /usr/local
2018-02-25 07:14:49.989315 N  Using configuration directory = /root/.mythtv
2018-02-25 07:14:49.989494 I  Assumed character encoding: da_DK.UTF-8
2018-02-25 07:14:49.993431 I  Using localhost value of SecCore
2018-02-25 07:14:49.993562 I  Start up testing connections. DB 172.16.0.10, BE , attempt 0, status dbAwake
2018-02-25 07:14:51.052734 N  Setting QT default locale to da_DK
2018-02-25 07:14:51.052782 I  Current locale da_DK
2018-02-25 07:14:51.054667 N  Reading locale defaults from /usr/local/share/mythtv//locales/da_dk.xml
2018-02-25 07:14:51.087648 I  Loading da translation for module mythfrontend
2018-02-25 07:14:51.101003 I  Current MythTV Schema Version (DBSchemaVer): 1348
2018-02-25 07:14:51.102137 I  Loading da translation for module mythfrontend
2018-02-25 07:14:51.110966 I  MythCoreContext::CheckProtoVersion(): Using protocol version 91 BuzzOff
2018-02-25 07:14:51.113816 W  Time difference between the master backend and this system is 32 seconds.
2018-02-25 07:14:51.116932 N  MythBackend: Running as a slave backend.
2018-02-25 07:14:55.762620 I  Registering HouseKeeperTask 'JobQueueRecover'.
2018-02-25 07:14:55.762696 I  Registering HouseKeeperTask 'HardwareProfiler'.
2018-02-25 07:14:55.768291 I  Starting HouseKeeper.
2018-02-25 07:14:55.820625 I  Listening on TCP 0.0.0.0:6544
2018-02-25 07:14:55.823562 I  Listening on TCP [::]:6544
2018-02-25 07:14:55.823613 I  Listening on TCP 0.0.0.0:6554
2018-02-25 07:14:55.823640 I  Listening on TCP [::]:6554
2018-02-25 07:14:55.823718 I  Listening on TCP 0.0.0.0:6549
2018-02-25 07:14:55.823746 I  Listening on TCP [::]:6549
2018-02-25 07:14:57.106118 E  Bonjour: Error: -65537
2018-02-25 07:14:57.106135 E  Bonjour: Failed to register service.
2018-02-25 07:14:57.106155 I  Main::Registering HttpStatus Extension
2018-02-25 07:14:57.116414 I  Listening on TCP 0.0.0.0:6543
2018-02-25 07:14:57.116545 I  Listening on TCP [::]:6543
2018-02-25 07:14:58.168754 N  MainServer: Connecting to master server: 172.16.0.10:6543
2018-02-25 07:14:58.170438 N  MainServer: Connected successfully
2018-02-25 07:15:55.807025 I  Queueing HouseKeeperTask 'JobQueueRecover'.
2018-02-25 07:15:55.816982 I  Running HouseKeeperTask 'JobQueueRecover'.
2018-02-25 07:15:55.820280 I  HouseKeeperTask 'JobQueueRecover' Finished Successfully.
As I see this - everything seems to be configured correctly - But on my Master Backend - I cannot see the Secondary master Backend

Is there any special settings for this in 0.29+ - Normally I didn't have these problems earliere when running 2 Backends? So what am I doing wrong here since I cannot see the Secondary Backend and its tunercards on my master backend?
I'm getting this error in my logfile

Code: Select all

2018-02-25 07:33:31.348123 E  MythSocket(556e81b02ac0:68): ReadStringList: Error, timed out after 30000 ms.
2018-02-25 07:33:31.348285 W  MainServer: Unknown socket closing MythSocket(0x556e81b02ac0)
2018-02-25 07:33:31.348427 E  MythSocket(556e81b02ac0:-1): No response.
2018-02-25 07:33:31.348449 E  MainServer: Failed to open master server socket, timeout
2018-02-25 07:33:31.349421 I  Control sock(556e81b04470) disconnected
2018-02-25 07:33:32.300520 N  MainServer: Connecting to master server: 172.16.0.188:6543
2018-02-25 07:33:32.301184 N  MainServer: Connected successfully
Post Reply