I also have a ASUS VS228H-P Full HD 1920x1080 via DVI from the GT 610.
When the system boots, it start with the VS228H then switches to the Samsung as x server fires up.
I would like to change this behavior by having the VS228H be a clone of the HDTV (two monitors, one screen).
The hardware is capable because it works in MS Windows.
I ran "# nvidia-xconfig" but didn't help.
I reasonably sure it's done in xorg.conf but I'm stumped as to how?
When I run xrandr:
Code: Select all
[ljohnson@KISE-066 Desktop]$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
1920x1080 60.00 + 59.94 29.97* 23.97 60.05 60.00
1680x1050 59.95
1600x1200 60.00
1440x900 74.98 59.89
1360x768 60.02
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32
720x480 59.94
640x480 75.00 72.81 59.94
Code: Select all
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputClass"
Identifier "Ignore MCE IR Keyboard/Mouse (mceusb)"
MatchProduct "MCE IR Keyboard/Mouse (mceusb)"
MatchIsKeyboard "true"
Option "Ignore" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "SAMSUNG"
HorizSync 26.0 - 81.0
VertRefresh 24.0 - 75.0
Option "DPMS" "false"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 610"
Option "TripleBuffer" "True"
Option "NoLogo" "True"
Option "ConnectedMonitor" "DFP-1"
Option "CustomEDID" "DFP-1:/etc/X11/edid.bin"
Option "IgnoreEDID" "false"
Option "UseEDID" "True"
Option "UseEvents" "True"
Option "DynamicTwinView" "false"
Option "TwinView" "true"
Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerDefaultAC=0x1"
Option "Coolbits" "8"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseEvents" "True"
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1"
Option "metamodes" "1920x1080 +0+0 { ForceFullCompositionPipeline = On }"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection