mythtranscode failing on one recording

bpmod · Post by **bpmod** » Fri Nov 26, 2021 11:47 pm

Hello All!

I am sure that it is the recording, as the same command line has been working on over a thousand recording for years.

Here is the command line:

Code: Select all

mythtranscode --chanid 1231 --starttime 20210319232900 --mpeg2 --honorcutlist -o ./temp/sIhjJxx.mpg

Here is the output:

Code: Select all

2021-11-26 18:20:02.818983 C  mythtranscode version:  [v29.1] www.mythtv.org
2021-11-26 18:20:02.818998 C  Qt version: compile: 5.5.1, runtime: 5.9.5
2021-11-26 18:20:02.819002 N  Enabled verbose msgs:  general
2021-11-26 18:20:02.819009 N  Setting Log Level to LOG_INFO
2021-11-26 18:20:02.829655 I  Setup Interrupt handler
2021-11-26 18:20:02.829665 I  Setup Terminated handler
2021-11-26 18:20:02.829671 I  Setup Segmentation fault handler
2021-11-26 18:20:02.829674 I  Setup Aborted handler
2021-11-26 18:20:02.829679 I  Setup Bus error handler
2021-11-26 18:20:02.829682 I  Setup Floating point exception handler
2021-11-26 18:20:02.829687 I  Setup Illegal instruction handler
2021-11-26 18:20:02.829691 I  Setup Real-time signal 0 handler
2021-11-26 18:20:02.829697 I  Setup Hangup handler
2021-11-26 18:20:02.829775 N  Using runtime prefix = /usr
2021-11-26 18:20:02.829778 N  Using configuration directory = /home/brian/.mythtv
2021-11-26 18:20:02.829849 I  Assumed character encoding: en_CA.UTF-8
2021-11-26 18:20:02.830139 N  Empty LocalHostName.
2021-11-26 18:20:02.830146 I  Using localhost value of jack
2021-11-26 18:20:02.830181 I  Start up testing connections. DB localhost, BE , attempt 0, status dbAwake
2021-11-26 18:20:02.830656 I  Added logging to the console
2021-11-26 18:20:03.841081 N  Setting QT default locale to en_CA
2021-11-26 18:20:03.841091 I  Current locale en_CA
2021-11-26 18:20:03.841135 N  Reading locale defaults from /usr/share/mythtv//locales/en_ca.xml
2021-11-26 18:20:03.845540 I  Loading en_ca translation for module mythfrontend
2021-11-26 18:20:03.846948 N  Transcoding from /bri/recordings/1231_20210319232900.ts to ./temp/sIhjJxx.mpg
2021-11-26 18:20:03.846954 I  Honoring the cutlist while transcoding
2021-11-26 18:20:03.850098 I  Opening /bri/recordings/1231_20210319232900.ts
2021-11-26 18:20:03.863718 I  PES packet size mismatch
2021-11-26 18:20:03.863743 I  Input #0, mpegts, from '/bri/recordings/1231_20210319232900.ts':
2021-11-26 18:20:03.863749 I    Duration: 00:32:19.37, start: -16.759356, bitrate: 6385 kb/s
2021-11-26 18:20:03.863791 I      Stream #0:0[0x31]: Video: mpeg2video (Main), yuv420p(tv, top first), 1920x1080 [SAR 1:1 DAR 16:9], 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc
2021-11-26 18:20:03.864051 I      Stream #0:1[0x34](eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 384 kb/s
2021-11-26 18:20:03.864064 I      Stream #0:2[0x35](spa): Audio: ac3, 48000 Hz, mono, fltp, 96 kb/s
2021-11-26 18:20:03.864070 E  Skipping audio stream: 2
2021-11-26 18:20:03.868964 I  #0 PTS:-00:00:15.793 Delta: 0.0ms queue: 29
2021-11-26 18:20:03.868987 I  #1 PTS:-00:00:15.799 Delta: 6.06667ms queue: 2
2021-11-26 18:20:03.869014 N  MPEG2fixup::InitReplex(): High Definition input, increasing replex buffers
2021-11-26 18:20:03.962325 I  Del map found 0 at 2460 (2460)
2021-11-26 18:20:03.974096 E  Deadlock detected.  One buffer is full when the other is empty!  Aborting
2021-11-26 18:20:03.974494 E  Transcoding /bri/recordings/1231_20210319232900.ts failed

I have transcoded many recording that have been damaged, usually due to reception problems, but even on those, mythtrancode has never given up.

Also, mythtv *usually* tells me when a recording has been damaged. this one has no indication of that.

Running v29 fixes on Ubuntu 18.04 if that is important.

Thanks for any help anyone can give.

Brian