bis letzte Woche lief mein Videorechner noch ohne Probleme. Dann hat sich meine Festplatte verabschiedet und seit dem ist da der Wurm drinne.
Folgendes Problem.
Mein Rechner ist schon betagt lief aber noch ohne Probleme.
Kubuntu 16.04 mit Technisat Skystar 2 Karte.
Seit in Kubuntu 16.04 nicht mehr Linux-firmware-nonfree mitgeliefert wird musste ich es von Hand installieren.
Das hat letztes mal auch super geklappt und alles lief Prima bis meine alte Platte nicht mehr wollte.
Also habe ich mir ne neue Festplatte gekauft und mit dem alten USB-Stick die 16.04er version versucht wieder zu installieren.
Dieser Stick hatte ich schon bei der letzten Installation benutzt und alles lief gut.
Das Linux-firmware-Nonfree von Hand installiert, mythtv installiert und versucht ins setup zu gehen.
Das funktionierte aber nicht.
systemctl status mythtv-backend.service bringt folgenden Fehler:
Code: Select all
thomas@videorechner:~$ systemctl status mythtv-backend.service
● mythtv-backend.service - MythTV Backend
Loaded: loaded (/lib/systemd/system/mythtv-backend.service; enabled; vendor preset: enabled)
Active: inactive (dead) (Result: exit-code) since Tue 2017-07-11 23:09:37 CEST; 24min ago
Docs: https://www.mythtv.org/wiki/Mythbackend
Process: 1871 ExecStart=/usr/bin/mythbackend --quiet --syslog local7 $ADDITIONAL_ARGS (code=exited, status=138)
Main PID: 1871 (code=exited, status=138)
Jul 11 23:09:36 videorechner systemd[1]: mythtv-backend.service: Unit entered failed state.
Jul 11 23:09:36 videorechner systemd[1]: mythtv-backend.service: Failed with result 'exit-code'.
Jul 11 23:09:37 videorechner systemd[1]: mythtv-backend.service: Service hold-off time over, scheduling restart.
Jul 11 23:09:37 videorechner systemd[1]: Stopped MythTV Backend.
Jul 11 23:09:37 videorechner systemd[1]: mythtv-backend.service: Start request repeated too quickly.
Jul 11 23:09:37 videorechner systemd[1]: Failed to start MythTV Backend.
Code: Select all
thomas@videorechner:~$ dmesg | grep fw
[ 226.225533] b2c2_flexcop_pci 0000:00:0e.0: Direct firmware load for dvb-fe-cx24120-1.20.58.2.fw failed with error -2
[ 226.225542] cx24120: ### ERROR: Could not load firmware (dvb-fe-cx24120-1.20.58.2.fw): -2
thomas@videorechner:~$
Code: Select all
w_scan -fs -s S19E2 -E0 -X > channels.conf
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
Ich habe ehrlich keinen Plan mehr was ich tun kann.
Die Karte sollte eigentlich nicht defekt sein aber genau sagen kann ich es natürlich nicht.
Gibt es eine Möglichkeit die Karte zum laufen zu bringen ?
Ich glaube ich habe da 2 Fehler.
Backend.log zeigt
Code: Select all
....
Jul 11 23:48:10 videorechner mythbackend: mythbackend[3508]: E CoreContext mythcorecontext.cpp:979 (GetBackendServerIP) MythCoreContext::GetBackendServerIP(): No address defined for host: localhost
Jul 11 23:48:10 videorechner mythbackend: mythbackend[3508]: E MythSocketThread(-1) mythsocket.cpp:729 (ConnectToHostReal) MythSocket(1c62b90:-1): Failed to connect to (127.0.0.1:6543) Connection refused
Jul 11 23:48:10 videorechner mythbackend: mythbackend[3508]: E CoreContext mythcorecontext.cpp:979 (GetBackendServerIP) MythCoreContext::GetBackendServerIP(): No address defined for host: videorechner
Jul 11 23:48:10 videorechner mythbackend: mythbackend[3508]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: C thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) mythbackend version: fixes/0.28 [v0.28-2-g15cf421] www.mythtv.org
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: C thread_unknown mythcommandlineparser.cpp:2601 (ConfigureLogging) Qt version: compile: 5.5.1, runtime: 5.5.1
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N thread_unknown mythcommandlineparser.cpp:2603 (ConfigureLogging) Enabled verbose msgs: general
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N thread_unknown logging.cpp:920 (logStart) Setting Log Level to LOG_INFO
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Unterbrechung handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Beendet handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Speicherzugriffsfehler handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Abgebrochen handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus-Zugriffsfehler handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Gleitkomma-Ausnahme handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Ungültiger Maschinenbefehl handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-Time Signal 0 handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aufgelegt handler
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N thread_unknown mythdirs.cpp:192 (InitializeMythDirs) Using runtime prefix = /usr
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N thread_unknown mythdirs.cpp:194 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I CoreContext mythcorecontext.cpp:266 (Init) Assumed character encoding: de_DE.UTF-8
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N CoreContext mythcontext.cpp:505 (LoadDatabaseSettings) Empty LocalHostName.
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I CoreContext mythcontext.cpp:513 (LoadDatabaseSettings) Using localhost value of videorechner
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I Logger logging.cpp:313 (run) Added logging to the console
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N CoreContext mythcorecontext.cpp:1670 (InitLocale) Setting QT default locale to de_DE
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I CoreContext mythcorecontext.cpp:1703 (SaveLocaleDefaults) Current locale de_DE
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: N CoreContext mythlocale.cpp:123 (LoadDefaultsFromXML) Reading locale defaults from /usr/share/mythtv//locales/de_de.xml
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I CoreContext mythtranslation.cpp:73 (load) Loading de translation for module mythfrontend
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I CoreContext schemawizard.cpp:120 (Compare) Current MythTV Schema Version (DBSchemaVer): 1344
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I CoreContext mythtranslation.cpp:73 (load) Loading de translation for module mythfrontend
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: E CoreContext mythcorecontext.cpp:979 (GetBackendServerIP) MythCoreContext::GetBackendServerIP(): No address defined for host: localhost
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: E MythSocketThread(-1) mythsocket.cpp:729 (ConnectToHostReal) MythSocket(1b6b620:-1): Failed to connect to (127.0.0.1:6543) Connection refused
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: E CoreContext mythcorecontext.cpp:979 (GetBackendServerIP) MythCoreContext::GetBackendServerIP(): No address defined for host: videorechner
Jul 11 23:48:11 videorechner mythbackend: mythbackend[3516]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
thomas@videorechner:~$
....
Hat jemand ne Idee was ich da tun kann ?
Ich habe das System eben neu aufgesetzt und alles Platt gemacht. Ich komme aber nicht weiter
Gruß
Thomas