channels.conf importieren
Moderators: dekarl, daschatten
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
channels.conf importieren
Hallo
ich bin dabei Mythtv einzurichten. Dabei habe ich nun Probleme.Der Sendersuchlauf funktioniert nicht. Eswerden keine Sender gefunden. Ich habe nun über ein anderes Tool eine 'channels.conf' generiert. Wie kann ich diese Datei in MythTV importieren?
ich bin dabei Mythtv einzurichten. Dabei habe ich nun Probleme.Der Sendersuchlauf funktioniert nicht. Eswerden keine Sender gefunden. Ich habe nun über ein anderes Tool eine 'channels.conf' generiert. Wie kann ich diese Datei in MythTV importieren?
Re: channels.conf importieren
Hallo mythTV-Nutzer,
das geht leider allen so, bist das Problem behoben ist kannst du dir diesen Beitrag mal ansehen um eine Sendersuchlauf anzustoßen:
viewtopic.php?f=11&t=1168#p5816
Der hilft bei der Sendersuche bei einem Sat Setup.
Wenn du Kabel hast geht das so ähnlich, aber dann kannst du auch noch mal nachfragen.
Grüße Beppo
das geht leider allen so, bist das Problem behoben ist kannst du dir diesen Beitrag mal ansehen um eine Sendersuchlauf anzustoßen:
viewtopic.php?f=11&t=1168#p5816
Der hilft bei der Sendersuche bei einem Sat Setup.
Wenn du Kabel hast geht das so ähnlich, aber dann kannst du auch noch mal nachfragen.
Grüße Beppo
Viele Grüße Beppo
Re: channels.conf importieren
Diese Funktion wurde entfernt, nachdem sie ewig defekt war und sich niemand gefunden hat um sie zu reparieren. Ein Kanalsuchlauf funktioniert häufig, in dem man einen einzelnen Transponder mit allen Parametern manuell scannt und von der die anderen Transponder lernen lässt.mythTV-Nutzer wrote:Wie kann ich diese Datei in MythTV importieren?
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
Re: channels.conf importieren
Dank an euch alle für die Antworten. Leider habe ich immer noch nicht verstanden, wie das mit der Kanalsuche funktioniert.
Ich bin im Programm backend unter 'Verknüpfungen' und wähle dann 'Sendersuchlauf' aus. Dort erhalte ich unter 'Scantyp' 4 Möglichkeiten angeboten:
- Vollständiger Suchlauf
- Importieren eines existierenden Scans
- Voll. Suchlauf aller bekannten Transponders
- Voll. Suchlauf eines bekannten Transponders
Keine der Möglichkeiten funktioniert bei mir. Existiert eine Anleitung für die Kanalsuche die funktioniert?
Ich bin im Programm backend unter 'Verknüpfungen' und wähle dann 'Sendersuchlauf' aus. Dort erhalte ich unter 'Scantyp' 4 Möglichkeiten angeboten:
- Vollständiger Suchlauf
- Importieren eines existierenden Scans
- Voll. Suchlauf aller bekannten Transponders
- Voll. Suchlauf eines bekannten Transponders
Keine der Möglichkeiten funktioniert bei mir. Existiert eine Anleitung für die Kanalsuche die funktioniert?
Re: channels.conf importieren
Hallo mythTV-Nutzer,
leider wissen wir immer noch nicht auf welchen Übertragungsweg du setzt? Satellit oder Kabel oder was ganz anderes?
So sieht das bei mir aus wenn ich bei KBD einen Sendersuchlauf durch laufen lassen möchte:
Bei einem Sat-Setup musst du natürlich andere Frequenzen nehmen:
z.B. der Transponder für ZDF HD liegt bei Astra 19,2° bei
Frequenz: 1136175
Polarität: horizontal
Symbolrate: 22000000
FEC 2/3
Quelle: http://de.kingofsat.net/tp.php?tp=11
Den Rest findet Mythtv dann von alleine. Und für jeden weiteren Suchlauf kannst du "Voll. Suchlauf aller bekannten Transponders" machen.
Viele Grüße Beppo
leider wissen wir immer noch nicht auf welchen Übertragungsweg du setzt? Satellit oder Kabel oder was ganz anderes?
So sieht das bei mir aus wenn ich bei KBD einen Sendersuchlauf durch laufen lassen möchte:
Bei einem Sat-Setup musst du natürlich andere Frequenzen nehmen:
z.B. der Transponder für ZDF HD liegt bei Astra 19,2° bei
Frequenz: 1136175
Polarität: horizontal
Symbolrate: 22000000
FEC 2/3
Quelle: http://de.kingofsat.net/tp.php?tp=11
Den Rest findet Mythtv dann von alleine. Und für jeden weiteren Suchlauf kannst du "Voll. Suchlauf aller bekannten Transponders" machen.
Viele Grüße Beppo
Viele Grüße Beppo
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
Re: channels.conf importieren
Hallo
Danke für die Unterstützung. Ich versuche Daten von einer Satellitenanlage zu erhalten. Habe aber weiterhin keinen Erfolg.
So sieht es bei mir aus, wenn ich einen Sendersuchlauf starte. Ich erhalte aber immer die Meldung 'Keine Sender gefunden'. Was mache ich falsch?
Danke für die Unterstützung. Ich versuche Daten von einer Satellitenanlage zu erhalten. Habe aber weiterhin keinen Erfolg.
So sieht es bei mir aus, wenn ich einen Sendersuchlauf starte. Ich erhalte aber immer die Meldung 'Keine Sender gefunden'. Was mache ich falsch?
- Attachments
-
- Screenshot from 2016-01-02 12-43-15.png (85.53 KiB) Viewed 4049 times
Re: channels.conf importieren
Hallo
sag mal hast du ein DiSEqC Drehanlage an der Sat-Schüssel?
Ich weiß nicht wofür die Einstellung "Rollbewegen" sein sollte wenn du ein Universal LNB hast.
Überprüfe mal dein Setup und stell so viel wie möglich auf "automatisch"
Grüße Beppo
sag mal hast du ein DiSEqC Drehanlage an der Sat-Schüssel?
Ich weiß nicht wofür die Einstellung "Rollbewegen" sein sollte wenn du ein Universal LNB hast.
Überprüfe mal dein Setup und stell so viel wie möglich auf "automatisch"
Grüße Beppo
Viele Grüße Beppo
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
Re: channels.conf importieren
Hallo,
nein ich habe ein LNB. Gibt es dort etwas zu beachten?
Hier meine Einstellungen beim backend setup:
Welche Einstellung ist falsch?
nein ich habe ein LNB. Gibt es dort etwas zu beachten?
Hier meine Einstellungen beim backend setup:
Welche Einstellung ist falsch?
- Attachments
-
- Screenshot from 2016-01-02 19-24-44.png (81.73 KiB) Viewed 4041 times
-
- Screenshot from 2016-01-02 19-23-40.png (73.81 KiB) Viewed 4041 times
-
- Screenshot from 2016-01-02 19-23-40.png (73.81 KiB) Viewed 4042 times
Re: channels.conf importieren
Moin,
um den LNB einzurichten musst du noch mal in die Einstellungen für die DVB-S Karte einsteigen.
Wie hier beschrieben:
https://www.mythtv.org/wiki/User_Manual ... figuration
Grüße Beppo
um den LNB einzurichten musst du noch mal in die Einstellungen für die DVB-S Karte einsteigen.
Wie hier beschrieben:
https://www.mythtv.org/wiki/User_Manual ... figuration
Grüße Beppo
Viele Grüße Beppo
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
Re: channels.conf importieren
Danke für die Unterstützung. Nun habe ich erfolgreich den Senderdurchlauf hinbekommen.
Aber schon taucht das nächste Problem auf. Ich kann immer noch nicht fernsehen.
Wenn ich im frontend auf 'Fernsehen' gehe bekomme ich die Meldung 'Ale Tuner sind aktuell belegt'. Was soll mir diese Meldung sagen?
Beim Verlassen des 'backend setup' bekomme ich auch 2 Meldungen, die ich nicht interpretieren kann. Ich habe nur eine TV-Karte. Über diese Karte habe ich auch erfolgreich die Sender ermittelt.
Mit besten Grüßen mythTV-Nutzer
Aber schon taucht das nächste Problem auf. Ich kann immer noch nicht fernsehen.
Wenn ich im frontend auf 'Fernsehen' gehe bekomme ich die Meldung 'Ale Tuner sind aktuell belegt'. Was soll mir diese Meldung sagen?
Beim Verlassen des 'backend setup' bekomme ich auch 2 Meldungen, die ich nicht interpretieren kann. Ich habe nur eine TV-Karte. Über diese Karte habe ich auch erfolgreich die Sender ermittelt.
Mit besten Grüßen mythTV-Nutzer
- Attachments
-
- Screenshot from 2016-01-03 14-55-36.png (38.8 KiB) Viewed 4028 times
-
- Screenshot from 2016-01-03 14-54-23.jpg (82.12 KiB) Viewed 4028 times
-
- Screenshot from 2016-01-03 14-53-15.jpg (54.88 KiB) Viewed 4028 times
Re: channels.conf importieren
Hallo,
ich schätze mal du hast eine Verknüpfung vergessen.
Ich habe mal exemplarisch eine "Screenshot Stecke" gemacht.
viewtopic.php?f=11&t=769&start=75#p3895
Du musst nur die Einstellungen für DVB-C mit deinem für das DVB-S Setup austauschen.
Viele Grüße
Beppo
ich schätze mal du hast eine Verknüpfung vergessen.
Ich habe mal exemplarisch eine "Screenshot Stecke" gemacht.
viewtopic.php?f=11&t=769&start=75#p3895
Du musst nur die Einstellungen für DVB-C mit deinem für das DVB-S Setup austauschen.
Viele Grüße
Beppo
Viele Grüße Beppo
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
Re: channels.conf importieren
Hallo benno,
Danke für deine Unterstützung. Ich habe deine letzten Hinweise noch nicht ausprobiert. Werde ich gleich nachholen. Bei meinen letzten Versuchen habe ich aber festgestellt, dass er nicht auf 'device /dev/dvb/adapter0/frontend0' zugreifen kann. Die Zugriffsrechte habe ich für alle User auf Lesen und Schreiben gesetzt. Dies hat aber am Fehlerbild nichts geändert. Die Datei hat weiterhin die Länge 0. Kann dies die Ursache für mein Problem sein?
Mit besten Grüßen mythTV-Nutzer
Hier die Daten aus dem 'mythbackend.log':
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: C thread_unknown mythcommandlineparser.cpp:2595 (ConfigureLogging) mythbackend version: fixes/0.27 [v0.27-193-g8ee257c] www.mythtv.org
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: C thread_unknown mythcommandlineparser.cpp:2597 (ConfigureLogging) Qt version: compile: 4.8.6, runtime: 4.8.6
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) Enabled verbose msgs: general
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown logging.cpp:914 (logStart) Setting Log Level to LOG_INFO
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I Logger logging.cpp:315 (run) Added logging to the console
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Interrupt handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Terminated handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Segmentation fault handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aborted handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus error handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Floating point exception handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Illegal instruction handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-time signal 0 handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown mythdirs.cpp:55 (InitializeMythDirs) Using runtime prefix = /usr
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown mythdirs.cpp:68 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythcorecontext.cpp:254 (Init) Assumed character encoding: de_DE.UTF-8
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) Empty LocalHostName.
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) Using localhost value of lutz-System-Product-Name
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I LogForward loggingserver.cpp:1372 (forwardMessage) New Client: (#1)
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: N CoreContext mythcorecontext.cpp:1328 (InitLocale) Setting QT default locale to de_US
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythcorecontext.cpp:1361 (SaveLocaleDefaults) Current locale de_US
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext mythlocale.cpp:108 (LoadDefaultsFromXML) No locale defaults file for de_US, skipping
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext schemawizard.cpp:118 (Compare) Current MythTV Schema Version (DBSchemaVer): 1317
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythtranslation.cpp:65 (load) Loading de translation for module mythfrontend
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: N CoreContext main_helpers.cpp:582 (run_backend) MythBackend: Starting up as the master server.
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[1]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/channelbase.cpp:944 (InitializeInputs) InitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 1failed init
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[2]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: W CoreContext recorders/dvbchannel.cpp:229 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Opening DVB frontend device failed.#012#011#011#011eno: Device or resource busy (16)
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/dvbchannel.cpp:234 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Failed to open DVB frontend device due to fatal error or too many attempts.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 2failed init
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: W CoreContext main_helpers.cpp:214 (setupTVs) MythBackend: No valid capture cards are defined in the database.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: W CoreContext scheduler.cpp:213 (VerifyCards) Scheduler: Listings source 'DVB-S' is defined, but is not attached to a card input.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext scheduler.cpp:224 (VerifyCards) Scheduler: No channel sources defined in the database
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: C thread_unknown mythcommandlineparser.cpp:2595 (ConfigureLogging) mythbackend version: fixes/0.27 [v0.27-193-g8ee257c] www.mythtv.org
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: C thread_unknown mythcommandlineparser.cpp:2597 (ConfigureLogging) Qt version: compile: 4.8.6, runtime: 4.8.6
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) Enabled verbose msgs: general
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown logging.cpp:914 (logStart) Setting Log Level to LOG_INFO
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I Logger logging.cpp:315 (run) Added logging to the console
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Interrupt handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Terminated handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Segmentation fault handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aborted handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus error handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Floating point exception handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Illegal instruction handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-time signal 0 handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown mythdirs.cpp:55 (InitializeMythDirs) Using runtime prefix = /usr
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown mythdirs.cpp:68 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythcorecontext.cpp:254 (Init) Assumed character encoding: de_DE.UTF-8
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) Empty LocalHostName.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) Using localhost value of lutz-System-Product-Name
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N CoreContext mythcorecontext.cpp:1328 (InitLocale) Setting QT default locale to de_US
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythcorecontext.cpp:1361 (SaveLocaleDefaults) Current locale de_US
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext mythlocale.cpp:108 (LoadDefaultsFromXML) No locale defaults file for de_US, skipping
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext schemawizard.cpp:118 (Compare) Current MythTV Schema Version (DBSchemaVer): 1317
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythtranslation.cpp:65 (load) Loading de translation for module mythfrontend
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N CoreContext main_helpers.cpp:582 (run_backend) MythBackend: Starting up as the master server.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[1]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I LogForward loggingserver.cpp:1372 (forwardMessage) New Client: (#1)
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/channelbase.cpp:944 (InitializeInputs) InitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 1failed init
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[2]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: W CoreContext recorders/dvbchannel.cpp:229 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Opening DVB frontend device failed.#012#011#011#011eno: Device or resource busy (16)
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/dvbchannel.cpp:234 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Failed to open DVB frontend device due to fatal error or too many attempts.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 2failed init
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: W CoreContext main_helpers.cpp:214 (setupTVs) MythBackend: No valid capture cards are defined in the database.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: W CoreContext scheduler.cpp:213 (VerifyCards) Scheduler: Listings source 'DVB-S' is defined, but is not attached to a card input.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext scheduler.cpp:224 (VerifyCards) Scheduler: No channel sources defined in the database
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: C thread_unknown mythcommandlineparser.cpp:2595 (ConfigureLogging) mythbackend version: fixes/0.27 [v0.27-193-g8ee257c] www.mythtv.org
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: C thread_unknown mythcommandlineparser.cpp:2597 (ConfigureLogging) Qt version: compile: 4.8.6, runtime: 4.8.6
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) Enabled verbose msgs: general
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown logging.cpp:914 (logStart) Setting Log Level to LOG_INFO
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I Logger logging.cpp:315 (run) Added logging to the console
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Interrupt handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Terminated handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Segmentation fault handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aborted handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus error handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Floating point exception handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Illegal instruction handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-time signal 0 handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown mythdirs.cpp:55 (InitializeMythDirs) Using runtime prefix = /usr
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown mythdirs.cpp:68 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythcorecontext.cpp:254 (Init) Assumed character encoding: de_DE.UTF-8
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) Empty LocalHostName.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) Using localhost value of lutz-System-Product-Name
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N CoreContext mythcorecontext.cpp:1328 (InitLocale) Setting QT default locale to de_US
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythcorecontext.cpp:1361 (SaveLocaleDefaults) Current locale de_US
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext mythlocale.cpp:108 (LoadDefaultsFromXML) No locale defaults file for de_US, skipping
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext schemawizard.cpp:118 (Compare) Current MythTV Schema Version (DBSchemaVer): 1317
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythtranslation.cpp:65 (load) Loading de translation for module mythfrontend
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N CoreContext main_helpers.cpp:582 (run_backend) MythBackend: Starting up as the master server.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[1]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I LogForward loggingserver.cpp:1372 (forwardMessage) New Client: (#1)
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/channelbase.cpp:944 (InitializeInputs) InitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 1failed init
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[2]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: W CoreContext recorders/dvbchannel.cpp:229 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Opening DVB frontend device failed.#012#011#011#011eno: Device or resource busy (16)
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/dvbchannel.cpp:234 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Failed to open DVB frontend device due to fatal error or too many attempts.
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 2failed init
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: W CoreContext main_helpers.cpp:214 (setupTVs) MythBackend: No valid capture cards are defined in the database.
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: W CoreContext scheduler.cpp:213 (VerifyCards) Scheduler: Listings source 'DVB-S' is defined, but is not attached to a card input.
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext scheduler.cpp:224 (VerifyCards) Scheduler: No channel sources defined in the database
Danke für deine Unterstützung. Ich habe deine letzten Hinweise noch nicht ausprobiert. Werde ich gleich nachholen. Bei meinen letzten Versuchen habe ich aber festgestellt, dass er nicht auf 'device /dev/dvb/adapter0/frontend0' zugreifen kann. Die Zugriffsrechte habe ich für alle User auf Lesen und Schreiben gesetzt. Dies hat aber am Fehlerbild nichts geändert. Die Datei hat weiterhin die Länge 0. Kann dies die Ursache für mein Problem sein?
Mit besten Grüßen mythTV-Nutzer
Hier die Daten aus dem 'mythbackend.log':
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: C thread_unknown mythcommandlineparser.cpp:2595 (ConfigureLogging) mythbackend version: fixes/0.27 [v0.27-193-g8ee257c] www.mythtv.org
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: C thread_unknown mythcommandlineparser.cpp:2597 (ConfigureLogging) Qt version: compile: 4.8.6, runtime: 4.8.6
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) Enabled verbose msgs: general
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown logging.cpp:914 (logStart) Setting Log Level to LOG_INFO
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I Logger logging.cpp:315 (run) Added logging to the console
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Interrupt handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Terminated handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Segmentation fault handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aborted handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus error handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Floating point exception handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Illegal instruction handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-time signal 0 handler
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown mythdirs.cpp:55 (InitializeMythDirs) Using runtime prefix = /usr
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N thread_unknown mythdirs.cpp:68 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythcorecontext.cpp:254 (Init) Assumed character encoding: de_DE.UTF-8
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: N CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) Empty LocalHostName.
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) Using localhost value of lutz-System-Product-Name
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I LogForward loggingserver.cpp:1372 (forwardMessage) New Client: (#1)
Jan 3 18:35:19 lutz-System-Product-Name mythbackend: mythbackend[1811]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: N CoreContext mythcorecontext.cpp:1328 (InitLocale) Setting QT default locale to de_US
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythcorecontext.cpp:1361 (SaveLocaleDefaults) Current locale de_US
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext mythlocale.cpp:108 (LoadDefaultsFromXML) No locale defaults file for de_US, skipping
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext schemawizard.cpp:118 (Compare) Current MythTV Schema Version (DBSchemaVer): 1317
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: I CoreContext mythtranslation.cpp:65 (load) Loading de translation for module mythfrontend
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: N CoreContext main_helpers.cpp:582 (run_backend) MythBackend: Starting up as the master server.
Jan 3 18:35:20 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[1]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/channelbase.cpp:944 (InitializeInputs) InitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 1failed init
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[2]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:27 lutz-System-Product-Name mythbackend: mythbackend[1811]: W CoreContext recorders/dvbchannel.cpp:229 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Opening DVB frontend device failed.#012#011#011#011eno: Device or resource busy (16)
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/dvbchannel.cpp:234 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Failed to open DVB frontend device due to fatal error or too many attempts.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 2failed init
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: W CoreContext main_helpers.cpp:214 (setupTVs) MythBackend: No valid capture cards are defined in the database.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: W CoreContext scheduler.cpp:213 (VerifyCards) Scheduler: Listings source 'DVB-S' is defined, but is not attached to a card input.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1811]: E CoreContext scheduler.cpp:224 (VerifyCards) Scheduler: No channel sources defined in the database
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: C thread_unknown mythcommandlineparser.cpp:2595 (ConfigureLogging) mythbackend version: fixes/0.27 [v0.27-193-g8ee257c] www.mythtv.org
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: C thread_unknown mythcommandlineparser.cpp:2597 (ConfigureLogging) Qt version: compile: 4.8.6, runtime: 4.8.6
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) Enabled verbose msgs: general
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown logging.cpp:914 (logStart) Setting Log Level to LOG_INFO
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I Logger logging.cpp:315 (run) Added logging to the console
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Interrupt handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Terminated handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Segmentation fault handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aborted handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus error handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Floating point exception handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Illegal instruction handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-time signal 0 handler
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown mythdirs.cpp:55 (InitializeMythDirs) Using runtime prefix = /usr
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N thread_unknown mythdirs.cpp:68 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythcorecontext.cpp:254 (Init) Assumed character encoding: de_DE.UTF-8
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) Empty LocalHostName.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) Using localhost value of lutz-System-Product-Name
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N CoreContext mythcorecontext.cpp:1328 (InitLocale) Setting QT default locale to de_US
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythcorecontext.cpp:1361 (SaveLocaleDefaults) Current locale de_US
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext mythlocale.cpp:108 (LoadDefaultsFromXML) No locale defaults file for de_US, skipping
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext schemawizard.cpp:118 (Compare) Current MythTV Schema Version (DBSchemaVer): 1317
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I CoreContext mythtranslation.cpp:65 (load) Loading de translation for module mythfrontend
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: N CoreContext main_helpers.cpp:582 (run_backend) MythBackend: Starting up as the master server.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[1]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I LogForward loggingserver.cpp:1372 (forwardMessage) New Client: (#1)
Jan 3 18:35:28 lutz-System-Product-Name mythbackend: mythbackend[1970]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/channelbase.cpp:944 (InitializeInputs) InitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 1failed init
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[2]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:30 lutz-System-Product-Name mythbackend: mythbackend[1970]: W CoreContext recorders/dvbchannel.cpp:229 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Opening DVB frontend device failed.#012#011#011#011eno: Device or resource busy (16)
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/dvbchannel.cpp:234 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Failed to open DVB frontend device due to fatal error or too many attempts.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 2failed init
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: W CoreContext main_helpers.cpp:214 (setupTVs) MythBackend: No valid capture cards are defined in the database.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: W CoreContext scheduler.cpp:213 (VerifyCards) Scheduler: Listings source 'DVB-S' is defined, but is not attached to a card input.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1970]: E CoreContext scheduler.cpp:224 (VerifyCards) Scheduler: No channel sources defined in the database
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: C thread_unknown mythcommandlineparser.cpp:2595 (ConfigureLogging) mythbackend version: fixes/0.27 [v0.27-193-g8ee257c] www.mythtv.org
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: C thread_unknown mythcommandlineparser.cpp:2597 (ConfigureLogging) Qt version: compile: 4.8.6, runtime: 4.8.6
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown mythcommandlineparser.cpp:2599 (ConfigureLogging) Enabled verbose msgs: general
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown logging.cpp:914 (logStart) Setting Log Level to LOG_INFO
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I Logger logging.cpp:315 (run) Added logging to the console
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Interrupt handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Terminated handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Segmentation fault handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Aborted handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Bus error handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Floating point exception handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Illegal instruction handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I thread_unknown signalhandling.cpp:194 (SetHandlerPrivate) Setup Real-time signal 0 handler
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown mythdirs.cpp:55 (InitializeMythDirs) Using runtime prefix = /usr
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N thread_unknown mythdirs.cpp:68 (InitializeMythDirs) Using configuration directory = /home/mythtv/.mythtv
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythcorecontext.cpp:254 (Init) Assumed character encoding: de_DE.UTF-8
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N CoreContext mythcontext.cpp:504 (LoadDatabaseSettings) Empty LocalHostName.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythcontext.cpp:512 (LoadDatabaseSettings) Using localhost value of lutz-System-Product-Name
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N CoreContext mythcorecontext.cpp:1328 (InitLocale) Setting QT default locale to de_US
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythcorecontext.cpp:1361 (SaveLocaleDefaults) Current locale de_US
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext mythlocale.cpp:108 (LoadDefaultsFromXML) No locale defaults file for de_US, skipping
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext schemawizard.cpp:118 (Compare) Current MythTV Schema Version (DBSchemaVer): 1317
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I CoreContext mythtranslation.cpp:65 (load) Loading de translation for module mythfrontend
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: N CoreContext main_helpers.cpp:582 (run_backend) MythBackend: Starting up as the master server.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[1]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I LogForward loggingserver.cpp:1372 (forwardMessage) New Client: (#1)
Jan 3 18:35:31 lutz-System-Product-Name mythbackend: mythbackend[1992]: I LogForward loggingserver.cpp:295 (SyslogLogger) Added syslogging
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/channelbase.cpp:944 (InitializeInputs) InitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 1failed init
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext tv_rec.cpp:1749 (GetStartChannel) TVRec[2]: Problem finding starting channel, setting to default of '3'.
Jan 3 18:35:33 lutz-System-Product-Name mythbackend: mythbackend[1992]: W CoreContext recorders/dvbchannel.cpp:229 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Opening DVB frontend device failed.#012#011#011#011eno: Device or resource busy (16)
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/dvbchannel.cpp:234 (Open) DVBChan[2](/dev/dvb/adapter0/frontend0): Failed to open DVB frontend device due to fatal error or too many attempts.
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext recorders/channelbase.cpp:1232 (CreateChannel) ChannelBase: CreateChannel() Error: Failed to open device /dev/dvb/adapter0/frontend0
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext main_helpers.cpp:199 (setupTVs) Problem with capture cardsCard 2failed init
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: W CoreContext main_helpers.cpp:214 (setupTVs) MythBackend: No valid capture cards are defined in the database.
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: W CoreContext scheduler.cpp:213 (VerifyCards) Scheduler: Listings source 'DVB-S' is defined, but is not attached to a card input.
Jan 3 18:35:34 lutz-System-Product-Name mythbackend: mythbackend[1992]: E CoreContext scheduler.cpp:224 (VerifyCards) Scheduler: No channel sources defined in the database
Re: channels.conf importieren
Hallo,
das mit den Berechtigungen kannst du ganz schnell ausprobieren, wenn du das Backend mal als root startest.
Aber wenn ich die Logs so überfliege sieht es mir eher so aus als wenn du deine DVB-S Karten nicht mit der "Input Source" verknüpf hast.
siehe:
das mit den Berechtigungen kannst du ganz schnell ausprobieren, wenn du das Backend mal als root startest.
Aber wenn ich die Logs so überfliege sieht es mir eher so aus als wenn du deine DVB-S Karten nicht mit der "Input Source" verknüpf hast.
siehe:
undInitializeInputs(): #012#011#011#011Could not get inputs for the capturecard.#012#011#011#011Perhaps you have forgotten to bind video#012#011#011#011sources to your card's inputs?
Grüße BeppoListings source 'DVB-S' is defined, but is not attached to a card input.
Viele Grüße Beppo
-
- Junior
- Posts: 22
- Joined: Thu Dec 31, 2015 12:38 am
Re: channels.conf importieren
Hallo Beppo,
recht herzlichen Dank für deine Unterstützung- Nun läuft es. Bild und Ton sind da.
Mit großen Dank
mythtv-Nutzer
recht herzlichen Dank für deine Unterstützung- Nun läuft es. Bild und Ton sind da.
Mit großen Dank
mythtv-Nutzer
Re: channels.conf importieren
Morgen,
ja prima, dann wünsch ich dir viel Spass mit MythTV.
Grüße Beppo
ja prima, dann wünsch ich dir viel Spass mit MythTV.
Grüße Beppo
Viele Grüße Beppo