MythTV Official Community Forum

Ok thanks

Will stick with 32 but wont update everyday at this stage - it has been fine.

Thanks

After upgrading to version 32 - there are daily mythtv updates of around 200 Mb

Is this normal??



Thanks


mythbackend --version
Please attach all output as a file in bug reports.
MythTV Version : v32-Pre

further testing results in a timeout for channels if the line: GRUB_CMDLINE_LINUX_DEFAULT="cx23885.debug=8" is changed to any number less than 5 Using GRUB_CMDLINE_LINUX_DEFAULT="cx23885.debug=5" Results in working tuner cards - and smaller syslog and kern.log files But they are still increasing at ...

ok - so removing : v4l-cx23885-avcore-01.fw from /lib/firmware has NOT worked. All tuner cards working - however there are: very large log (syslog and kern.log) files being generated I can still tune using all four tuners however even with one tuner - I am getting large syslog and kern.log files as ...

Using a Hauppagge quadHD

Adding this line:

GRUB_CMDLINE_LINUX_DEFAULT="cx23885.debug=8"

to

sudo nano /etc/default/grub

results in tuner cards working, however, it also results in extremely large log files at:

/var/log

further testing results in tuner card not working if the line:

GRUB_CMDLINE_LINUX_DEFAULT="cx23885.debug=8"

is removed from grub

however

if the line is included in grub the log files increase at about 1mB per second resulting in extremely large usage up to 40Gb per hour

2 days ago - as a result of having cards working - the: var/log files: syslog and kernlog became extreemly large - e.g. 80Gb and they used all disk space. There were a lot of cx28 logs I turned off logging on grub boot options and is now ok FYI An attempted fix was to tun off the option "open on dem...

Can you scan channels and watch TV using Kaffiene on Ubuntu with the tuner card?

It did work out of the box - using Kaffeine

The cards do not even need to be set to DVB-T1 - even though I think there is no DVB-T2 in Sydney - it still works now - evern if cards are left to default DVB-T2 setting.

Have to cross fingers doing a reboot or upgrade though.

I will try above advice asap. In meantime - I seem to be able to trick myth into scanning I needed to put another tuner card in 'Winfast' barnd - not sure model. I left Quad in and swapped aerial to winfast - Changed tuner card setting from adapter0 to adapter 4 tried to scan using adapter 4 but no ...

Confirming that all of those firmware are present. Thanks for confirming that the card will work, however, where are you located? Also in relation to your info: Re: Works fine with mythtv master now & setting all tuners to T2. Full mythtv scan finds all DVB-T & T2 broadcasts. Do you get all four tun...

The tuner fw seems to be working because all channels are available in Kaffeine.

Failed to prevent change to DVB-T2 when accessing tuner card menu option after switching and saving the setting for DVB-T1.

Still fails after deleting all tuner cards and files in /dev/adapters * and hard reboot.

Can watch TV in Kaffeine - no worries

Thanks Attempted a cold restart - same issues Information needed: output of: mythbackend --version and lspci -v mythbackend --version Please attach all output as a file in bug reports. MythTV Version : v31-Pre MythTV Branch : Network Protocol : 91 Library API : 31.20190109-1 QT Version : 5.9.5 lspci...