Search found 485 matches

by wesnewell
Mon Jun 10, 2019 9:24 pm
Forum: Troubleshooting
Topic: ir-keytable not recognizing hauppauge remote
Replies: 2
Views: 54
United States of America

Re: ir-keytable not recognizing hauppauge remote

Thought this sounded familiar. see this.
viewtopic.php?f=3&t=2977
by wesnewell
Mon Jun 10, 2019 9:14 pm
Forum: Troubleshooting
Topic: ir-keytable not recognizing hauppauge remote
Replies: 2
Views: 54
United States of America

Re: ir-keytable not recognizing hauppauge remote

If ir-krytable doesn't see your ir receiver then you need to fix that first. Might try and installing the mce driver (modprobe mceusb) and try again. ir-keytable even sees the receivers in my tuner cards, but I don't use them. Once you get the receiver recognized, then you will need to create a keym...
by wesnewell
Wed May 29, 2019 12:26 pm
Forum: Hardware
Topic: AMD Ryzen 3 2200G
Replies: 21
Views: 1900
United States of America

Re: AMD Ryzen 3 2200G

If you no longer have the nvidia card installed, you should not need the nvidia drivers installed. Mine works perfectly with the kernel drivers and playback in mythtv set to the normal profile. There are no additional drivers even listed.
by wesnewell
Tue May 28, 2019 12:24 pm
Forum: Hardware
Topic: AMD Ryzen 3 2200G
Replies: 21
Views: 1900
United States of America

Re: AMD Ryzen 3 2200G

mtrax wrote:
Tue May 28, 2019 7:36 am
how do you get update notifications of new kernel?
Screenshot_2019-05-28_07-21-20.png
Screenshot_2019-05-28_07-21-20.png (71 KiB) Viewed 108 times
by wesnewell
Tue May 28, 2019 2:49 am
Forum: Hardware
Topic: AMD Ryzen 3 2200G
Replies: 21
Views: 1900
United States of America

Re: AMD Ryzen 3 2200G

Notifications if you want them. Now running 5.1.5.
by wesnewell
Sat May 25, 2019 4:16 am
Forum: Hardware
Topic: AMD Ryzen 3 2200G
Replies: 21
Views: 1900
United States of America

Re: AMD Ryzen 3 2200G

No issues here. Running 5.1.4 now.
by wesnewell
Thu May 23, 2019 5:39 pm
Forum: Troubleshooting
Topic: WinQuadHD Tuner 1609 - Only 1 Tuner Usable
Replies: 4
Views: 104
United States of America

Re: WinQuadHD Tuner 1609 - Only 1 Tuner Usable

Try a warm reboot. If that doesn't fix it. Try upgrading the kernel to 5.1 wes@mythfe0:~$ uname -a Linux mythfe0 5.1.4-050104-generic #201905220633 SMP Wed May 22 06:36:13 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux When I do a cold boot, I get the same problem since switching to fast booting ssd drive....
by wesnewell
Wed May 22, 2019 1:42 pm
Forum: Hardware
Topic: Recommend OTA ASTC tuner card
Replies: 16
Views: 1464
United States of America

Re: Recommend OTA ASTC tuner card

Are you booting from SSD? If so try a warm reboot and see if all tuners show up then. Same thing happens here from a cold boot. A reboot shows all 6 tuners. If your tuner numbering has gotten out of whack, you have to delete them all and add them again. You should have tuners 0-3,
by wesnewell
Sun May 19, 2019 6:13 am
Forum: Troubleshooting
Topic: [Solved] How do I set the commercial flagging method to all in v30
Replies: 6
Views: 137
United States of America

Re: How do I set commercial flagging to all in MythTV version 30

If you want to flag all recordings. check the box on this profile and save it. Then every time you set a new recording......
Screenshot_2019-05-19_01-03-21.png
Screenshot_2019-05-19_01-03-21.png (96.02 KiB) Viewed 95 times
by wesnewell
Sun May 19, 2019 3:17 am
Forum: Troubleshooting
Topic: [Solved] How do I set the commercial flagging method to all in v30
Replies: 6
Views: 137
United States of America

Re: How do I set commercial flagging to all in MythTV version 30

I think there's some confusion here. There is no BE setting to set all recordings for commercial-detection, or even the type of detection. In the BE there's just a check to allow it, default is checked, and another to auto start it when the recording starts. Default is not checked, and I'd leave it ...
by wesnewell
Sat May 18, 2019 1:58 pm
Forum: Troubleshooting
Topic: [Solved] How do I set the commercial flagging method to all in v30
Replies: 6
Views: 137
United States of America

Re: How do I set commercial flagging to all in MythTV version 30

I think you just allow it in the be setup.If you want it on all shows, edit the default recording profile and check flagging in it. This could cause problems if you record many shows at the same time. Flagging takes a lot of cpu power.
by wesnewell
Sat May 18, 2019 1:45 pm
Forum: Hardware
Topic: Recommend OTA ASTC tuner card
Replies: 16
Views: 1464
United States of America

Re: Recommend OTA ASTC tuner card

Does your system see the tuners? ls/dev/dvb should show 4 adapters 0-3. Does it? exp. wes@mythfe0:~$ ls /dev/dvb adapter0 adapter1 adapter2 adapter3 adapter4 adapter5 If so then you just need to add the other tuners in mythtv-setup. If not, you may want to upgrade the kernel using ukuu. I'm running:...
by wesnewell
Tue May 14, 2019 5:52 pm
Forum: Troubleshooting
Topic: ERROR while downloading theme package from master backend
Replies: 6
Views: 166
United States of America

Re: ERROR while downloading theme package from master backend

That didn't fix it. Still get the error. Not a big deal for me as i know how to get them back.
by wesnewell
Mon May 13, 2019 9:20 pm
Forum: Troubleshooting
Topic: ERROR while downloading theme package from master backend
Replies: 6
Views: 166
United States of America

Re: ERROR while downloading theme package from master backend

Almost 2 weeks and no replies. Has anyone even tried to verify this. It does it on all 5 of my machines.
by wesnewell
Mon May 06, 2019 1:47 pm
Forum: Raspberry Pi
Topic: Programme Guide not scrolling left/right (Functionality 29.2 theme)
Replies: 4
Views: 441
United States of America

Re: Programme Guide not scrolling left/right (Functionality 29.2 theme)

Was just curious if this ever got resolved? If not, how did the 3 hour schedule work out for you.