# input: 0=COMPOSITE, 1=COMPONENT, 2=SDI, 3=HDMI input=3 # audio: 0=RCA, 1=SPDIF, 2=SDI, 3=HDMI audio=3 # codec: 1=MPEG, 2=AC3, 3=AAC, 6=MP3, 8=PCM, 9=PASSTHROUGH) codec=3 # Boost audio input gain. #boost # audiosamplerate: -1=FOLLOW_INPUT, 0=NONE, 1=32KHz, 2=44.1KHz, # 3=48KHz, 4=96KHz, 5=192KHz, 6=16KHz #audiosamplerate=3 # audiobitrate: -1=NONE, 0=32Kbps, 1=48Kbps, 2=56Kbps, 3=64Kbps, # 4=80Kbps, 5=96Kbps, -6=112Kbps, 7=128Kbps, 8=160Kbps, 9=192Kbps, # 10=224Kbps, 11=256Kbps, -12=320Kbps, 13=384Kbps, 14=448Kbps, # 15=576Kbps, 16=16Kbps, -17=8Kbps, 18=640Kbps, 19=768Kbps, # 20=960Kbps, 21=1024Kbps, -22=1152Kbps, 23=1280Kbps, 24=1344Kbps, # 25=1408Kbps, 26=1411Kbps, -27=1472Kbps, 28=1536Kbps, 29=MAX #audiobitrate=29 # videobitrate: Video bitrate #videobitrate=12000000 # videoratecontrol: 0=CBR, 1=VBR, 2=CAPPED_VBR #videoratecontrol=0 # minvbrrate: Mininum VBR bitrate #minvbrrate=12000000 # maxvbrrate: Maximum VBR bitrate #maxvbrrate=13000000 # tsbitrate: Transport Stream bitrate #tsbitrate=13000000 # profile: 0=Constrained baseline, 3=Main, 4=High #profile=4 # level: 100=LEVEL_1, 105=LEVEL_1B,110=LEVEL_1.1, 120=LEVEL_1.2, # 130=LEVEL_1.3, 200=LEVEL_2, 210=LEVEL_2.1, 220=LEVEL_2.2, # 300=LEVEL_3, 310=LEVEL_3.1, 320=LEVEL_3.2, 400=LEVEL_4, # 410=LEVEL_4.1, 420=LEVEL_4.2, 500=LEVEL_5, 510=LEVEL_5.1 #level=420 # bframes: 0-7 #bframes=3 # videoLatency: 0=low latency, 1=high latency #videoLatency=1 # aspect: aspect ratio #aspect=1.0 # serial: Serial number of device. serial=E524-00-00AE9E92 # output: Output destination #output=hdpvr2.ts # mythtv: MythTV External Recorder mode. mythtv=true # logpath: Location of log file logpath=/var/log/mythtv # override-logleve: emerg, alert, crit, err, warning, notice, info, debug # If specified, overrides the loglevel command-line option override-loglevel=notice # quiet: Don't log to console #quiet